Panasonic TH-103PF10EK manual DVI-D connection, Component / RGB connection, Signal Name, Pin No

Connections

DVI-D connection

This unit has terminal boards equivalent to DVI-D Terminal Board for PF Series (TY-FB9FDD) and BNC Component Video Terminal Board (TY-42TM6A) as standard equipment.

PC with DVI-D video out

DVI-D Input Connector Pin Layouts

2417

16 9

81

Connection port view

DVI-D video cable

(Within 5 m)	AUDIO
	DVI-D IN
	SLOT2

Mini-plug (M3)

Pin No.	Signal Name	Pin No.	Signal Name
1	T.M.D.S. data 2-	13	T.M.D.S. data 3+
2	T.M.D.S. data 2+	14	+5 V DC
3	T.M.D.S. data 2/4 shielded	15	Ground
4	T.M.D.S. data 4-	16	Hot plug sense
5	T.M.D.S. data 4+	17	T.M.D.S. data 0-
6	DDC clock	18	T.M.D.S. data 0+
7	DDC data	19	T.M.D.S. data 0/5 shielded
8		20	T.M.D.S. data 5-
9	T.M.D.S. data 1-	21	T.M.D.S. data 5+
10	T.M.D.S. data 1+	22	T.M.D.S. clock shield
11	T.M.D.S. data 1/3 shielded	23	T.M.D.S. clock+
12	T.M.D.S. data 3-	24	T.M.D.S. clock-

Notes:

•Additional equipment, cables and adapter plugs shown are not supplied with this set.

•Refer to page 51 for applicable input signal.

•Use the DVI-D cable complying with the DVI standard. Image deterioration may occur depending on the length or the quality of the cable.

COMPONENT / RGB connection

COMPONENT VIDEO OUT

Example of input signal source		PR
DVD	Y, PB, PR,	PB
	OUT	Y
Digital TV-SET-TOP-BOX		L
(DTV-STB)	AUDIO	R
	OUT

RCA-BNC adapter plug

RAUDIO L PR/CR/R PB/CB/B Y/G

COMPONENT/RGB IN

SLOT3

Computer RGB Camcorder

or

Notes:

•Change the “Component/RGB-in select” setting in the “Setup” menu to “Component”

(when Component signal connection) or “RGB” (when RGB signal connection). (see page 39)

•Additional equipment, cables and adapter plugs shown are not supplied with this set.

•Sync on G signal is needed. (see page 42)

11