Setup for Input Signals
Colour system / Panasonic Auto
Select Signal from the “Setup” menu during AV(S Video) input signal. (“Signal [AV]” menu is displayed.)
Press to select the “Colour system” or “Panasonic Auto”.
Press to select each functions.
Setup | 1/2 |
Signal |
|
| |
| RGB |
Input label | PC |
Power save | Off |
Standby save | Off |
Power management | Off |
Auto power off | Off |
OSD Language | English (UK) |
If the picture image becomes unstable:
With the system set on Auto, under conditions of low level or noisy input signals the image may in rare cases become unstable. Should this occur, set the system to match the format of the input signal.
Press ACTION (
) button
| Signal | [ AV ] |
|
|
|
|
|
| 3D Y/C Filter (NTSC) | On |
|
|
|
|
|
| Colour system | Auto |
|
|
|
|
|
| Cinema reality | Off |
|
|
|
|
|
| Panasonic Auto (4 : 3) | 4 : 3 |
|
|
|
|
|
| Off |
| |
|
|
|
|
Mode |
|
| Function |
|
|
Colour system | Set the colour system to match the input signal. When selecting “Auto”, the colour system is automatically | ||||
| selected from NTSC/PAL/SECAM, however, M.NTSC signal is not displayed properly depending on | ||||
| the attached terminal board. To display M.NTSC signal, select “M.NTSC” in Colour system. | ||||
| Auto | PAL | SECAM | M.NTSC | NTSC |
|
| ||||
Panasonic Auto | Set to “4 : 3” to view 4:3 images in an unchanged format when Panasonic Auto is selected. | ||||
(4 : 3) | If you would like to view 4:3 images in Just format, set to “Just”. |
| |||
Note:
Panasonic Auto does not function when BNC Dual Video Terminal Board
Cinema reality
Cinema reality:
When on, the display attempts to reproduce a more natural interpretation of sources such as movie pictures, which are recorded at 24 frames per second.
If the picture is not stable, turn the setting to off.
Note:
When On, this setting only affects the following signal input:
•NTSC / PAL signal input during “AV(S Video)” input signal.
•525i(480i), 625i(575i), 1125(1080) / 60i signal input during “Component” input signal.
Setup | 1/2 |
Signal |
|
| |
| RGB |
Input label | PC |
Power save | Off |
Standby save | Off |
Power management | Off |
Auto power off | Off |
OSD Language | English (UK) |
Press ACTION (
) button
1
2
Press to select Cinema reality.
Press to set On / Off.
| Signal | [ AV ] | ||
|
|
|
| |
| 3D Y/C Filter (NTSC) | On |
|
|
|
|
|
|
|
| Colour system | Auto |
|
|
|
|
|
| |
| Cinema reality | Off | ||
|
|
|
|
|
| Panasonic Auto (4 : 3) | 4 : 3 |
|
|
|
|
|
| |
| Off |
|
| |
|
|
|
|
|
| Signal | [ Component ] | ||
|
|
|
| |
| Cinema reality | Off | ||
|
|
|
|
|
| Off |
|
| |
|
|
|
|
|
Signal | [ RGB ] | |
|
|
|
Sync | Auto |
|
|
|
|
Cinema reality | Off | |
|
|
|
Off |
| |
Signal | [ Digital ] | |
|
|
|
Cinema reality | Off | |
|
|
|
Off |
| |
Press to exit from adjust mode.
41
