Panasonic TH-103PF10EK manual Off-timer, Function, Normal Standby, Initial Power, Mode, ID select

Options Adjustments

Options 2/3

Off-timer function	Enable
Initial Power Mode	Normal
ID select	0
Remote ID	Off
Serial ID	Off
Display size	Off
Studio W/B	Off
Studio Gain	Off

Item	Effect						Adjustments
Off-timer			Enable: Enables the “Off-timer function”.
			Disable:Disables the “Off-timer function”.
function	Enable	Disable
			Note: When “Disable” is set, the Off-timer is cancelled.
			Normal		Standby	On
			Sets the power mode of the unit for when the power recovers from failure or after plugging off
			and in again.
Initial Power			Normal: Power returns in as the same state as before the power interruption.
Mode			Standby:Power returns in standby mode. (Power Indicator : red/orange)
			On:		Power returns in power On. (Power Indicator : green)
			Note: When using multiple displays, “Standby” is preferred to be set in order to reduce a power
				load.
			Sets panel ID number when panel is used in “Remote ID” or “Serial ID”.
ID select			Set value range: 0 - 100
			(Standard value: 0)
Remote ID			Off: Disables ID remote control functions. You can use normal remote control operations.
	Off	On	On: Enable ID remote control functions.
			Sets the panel ID Control.
Serial ID	Off	On	Off: Disables external control by the ID.
			On: Enables the external control by the ID.
			Adjusts the image display size on screen.
			Off: Sets the normal image display size on screen.
			On: Sets the image display size approximately 95 % of the normal image display.
					Off		On
Display size			Notes:
	Off	On	• This setting is valid only when the input signals are as follows;
			NTSC, PAL, SECAM, M.NTSC, PAL60, PAL-M, PAL-N (BNC Dual Video Terminal Board (TY-FB9BD))
			525i, 525p, 625i, 625p, 750/60p, 750/50p, 1125/60i, 1125/50i, 1125/24sF, 1125/25p, 1125/24p,
			1125/30p, 1125/60p·50p, 1250/50i (Component Video, RGB, DVI, SDI, HDMI)

•This setting is invalid when two screen display, digital zoom, Multi display or Portrait display is selected.

•When “Display size” is set to “On”, “H-Pos” and “V-Pos” in “Pos. /Size” can be adjusted.

•Refer to each board’s operating instruction for DVI, SDI, HDMI’s corresponding signals.

			Off: Nullify all the settings adjusted.
Studio W/B	Off	On	On: Sets the colour temperature for TV studio.
			Note: Valid only when the low is set as colour temperature on screen adjustment.
			Sharpens the contrast for a better view when a part of the image is too light to see.
			Off: Disables “Studio Gain”.
Studio Gain	Off	On	On: Enables “Studio Gain”.
			Note: This setting is valid only when the input signals are as follows:
			Component Video, RGB (analog), SDI, HDMI

45