Panasonic TH-42PV700AZ, TH-50PV700AZ Data format for Card browsing, Hdmi connection

	Data format for Card browsing
Photo	: Still images recorded with digital still cameras compatible with JPEG files of
	DCF∗ and EXIF standards
Data format	: Baseline JPEG (Sub-sampling 4:4:4, 4:2:2 or 4:2:0)
Max. number of files : 9,999
Image resolution	: 160 × 120 to 10,000,000

•Compliant card type (maximum capacity): SDHC Card (4 GB), SD Card (2 GB), Multi Media Card (128 MB),

•miniSD Card (1 GB) (requiring miniSD adapter)

If miniSD Card is used, insert / remove it together with the adapter.

•Check the latest information on the card type at the following website. (English only) http://panasonic.co.jp/pavc/global/cs/

∗DCF (Design rule for camera file system): Unified standard established by Japan Electronics and Information Technology Industries Association (JEITA).

Note

•A JPEG image modified with a PC may not be displayed.

•Images imported from a PC must be compatible with EXIF (Exchangeable Image File) 2.0, 2.1, and 2.2.

•Partly degraded files might be displayed at a reduced resolution.

•Only “.JPG” extension can be read by this TV.

•The folder and file names may be different depending on the digital camera used.

•Do not use two-byte characters or other special codes.

•The card may become unusable with this TV if file or folder names are changed.

HDMI connection

HDMI (high-definition multimedia interface) allows you to enjoy high-definition digital images and high- quality sound by connecting the TV and the equipment.

HDMI-compatible equipment (∗1) with an HDMI or DVI output terminal, such as a set top box or a DVD player, can be connected to the HDMI terminal using an HDMI compliant (fully wired) cable.

About connections, see “External Equipment” (p. 32).

Note

•HDMI is the world’s first complete digital consumer AV interface complying with a non-compression standard.

•If the external equipment has only a DVI output, connect to the HDMI1 terminal via a DVI to HDMI adapter cable (∗2).

•When the DVI to HDMI adapter cable is used, connect the audio cable to the audio input terminal (HDMI1: use AUDIO IN terminals / HDMI3: use AV4 IN AUDIO terminals).

•Audio settings can be made on the “HDMI1 / 3 Input” menu screen. (p. 20)

•Applicable audio signal sampling frequencies (2ch L.PCM): 48 kHz, 44.1 kHz, 32 kHz

•HDMI2 terminal is for digital audio signal only.

•Use with a PC is not assumed.

•If the connected equipment has an aspect adjustment function, set the aspect ratio to “16:9”.

•These HDMI connectors are “type A”.

•These HDMI connectors are compatible with HDCP (High-Bandwidth Digital Content Protection) copyright protection.

•An equipment having no digital output terminal may be connected to the input terminal of either “Component”, “S-VIDEO”, or “Video” to receive analogue signals.

•The HDMI input terminal can be used with only the following image signals:

480i, 480p, 576i, 576p, 720p, 1080i and 1080p. Match the output setting of the digital equipment.

•For details of the applicable HDMI signals, see p. 38.

(∗1): The HDMI logo is displayed on HDMI-compliant equipment.

(∗2): Enquire at your local digital equipment retailer shop.

•Technical Information FAQs, etc.

37