Panasonic TH-L32D25M manual Quick Start Guide, Setup the wireless LAN connection, WPS Push button

Y

● For the information of the highlighted access point

● To search access points again

Setup the wireless LAN connection

Setup the wireless LAN connection to enable the network service functions.

●To setup the wireless LAN connection, the wireless LAN Adaptor is required.

●Confirm the encryption key, settings and positions of your access point before starting setup. For details, read the manual of the access point.

●Please note that this TV does not support wireless public access points.

Start wireless LAN connection setup?		Connect the Wireless LAN Adaptor to the USB 1 or 2 port
Yes	No

Please connect the wireless LAN adaptor to a USB terminal.

You can setup the

wireless LAN connection later “Network Setup” (p. 45)

●To skip this step

EXIT

or select “No”

Internet

environment

Wireless LAN Adaptor

Access point

select “Yes” access

Quick Start Guide

Connection Type

Please select network connection type.

WPS (Push button)

Search for access point

WPS (Push button)

WPS(Push button)

1)Please press the ‘WPS’ button on the access point until its light flashes.

2)When the light is flashing select ‘Connect’ on TV.

If you are unsure, please check the instruction manual of the access point.

Connect

Search for access point

Available Access Points

No.	SSID	Wireless type		Encrypt	Reception
1	Access Point A	11n	(2.4GHz)
2	Access Point B	11n	(5GHz)

Select the connection type	● If your access point supports WPS
access
	(Push button), then select this option.
select	If not, select “Search for access point”.

Press the WPS button on the access point until the light flashes. And then, press the OK button to connect the Wireless LAN Adaptor and the access point.

●Ensure that your access point supports WPS for this method.

●WPS: Wi-Fi Protected SetupTM

Access points found automatically are listed.

Select your desired access point.

Auto Tuning

3 Access Point C 11n (5GHz)

Encryption Key Setting

Connection will be made with the following settings:-

SSID : Access Point A

Authentication type : WPA-PSK

Encryption type : TKIP

access select

Access the encryption key input mode

RECALL

Please input the encryption key.

Encryption key

Access Point Settings

Encryption key

A B C D E F G H I						J K L M N O P Q R S T
U V W X Y Z					0 1	2 3 4 5 6 7 8 9 ! : #
a	b	c d	e	f g h i		j k l m n o p q r s t
u	v	w x	y	z ( ) +		- . * _

Access Point Settings

Encryption key is set to:-

XXXXXXXX

Select ‘Yes’ to confirm.

Select ‘No’ to change.

YesNo

●If the selected access point is not encrypted, the confirmation screen will be displayed. It is recommended to select the encrypted access point.

Enter the encryption key of the access point.

Set characters one by one

select	Store
	RETURN
set

●You can set characters by using numeric buttons (p. 22). Select “Yes”

select set

●To re-enter the encryption key, select “No”.

Wireless LAN connection setup is completed

●If the connection is failed, check the encryption key, settings or positions of your access point. For details, read the manual of the access point.

●If connection to the access point is successful, we recommend you perform the “Connection Test” to confirm connection to the internet has been made. The “Connection Test” can be found in the Network Setup menu (p. 47).

13