Panasonic TH-L32D25M manual Connection, Preparations, Advanced

Connection

●To use DIGA Recorder / DVD Player / Blu-ray Disc Player / HD Video Camera / LUMIX Camera

HDMI cable

DIGA Recorder / DVD Player / Blu-ray Disc Player / HD Video Camera / LUMIX Camera

with VIERA Link function

● To use Player theatre / Blu-ray Disc theatre:	● To use Amplifier:
Speaker system	Speaker system

HDMI cable

Optical digital

audio cable

or

RCA cable

Player theatre / Blu-ray Disc theatre with VIERA Link function

∗9

	HDMI cable
		Amplifier with
		VIERA Link
	Optical digital	function
	audio cable
HDMI	or	HDMI
cable	RCA cable	cable
	∗9
	HD Video
	Camera /
	LUMIX Camera	DIGA Recorder with
	with VIERA Link
	function	VIERA Link function

VIERA Link Functions

∗9: If the connected equipment has “HDAVI Control 5” function, you do not have to use this audio cable (Optical digital audio cable or RCA cable). In this case, connect the equipment to the TV’s HDMI2 terminal via an HDMI cable.

●This function may not work properly depending on the connected equipment.

●For DIGA Recorder / DVD Player / Blu-ray Disc Player / HD Video Camera / LUMIX Camera with VIERA Link function, connect to HDMI1, HDMI2 or HDMI3 terminal via an HDMI cable.

●For Player theatre / Blu-ray Disc theatre / Amplifier, connect to HDMI1, HDMI2 or HDMI3 terminal via an HDMI cable and/or either the optical digital audio cable or RCA cable for audio output from the TV.

●Use fully wired HDMI compliant cable. Non-HDMI-compliant cables cannot be utilized.

Recommended Panasonic’s HDMI cable part number:		• RP-CDHS50 (5.0 m)
• RP-CDHS15 (1.5 m)	• RP-CDHS30 (3.0 m)

Preparations

●Connect the equipment supporting VIERA Link.

●Set up the connected equipment. Read the manual of the equipment.

●For optimal recording, the settings of the recorder might be required. For details, read the manual of the recorder.

●Set VIERA Link On in Setup Menu “VIERA Link” (p. 27)

●Set up the TV After connection, turn the equipment on and then switch the TV on. Set the input mode to HDMI1, HDMI2 or HDMI3 (p. 19), and make sure that an image is displayed correctly.

This setup should be done each time when the following conditions occur:

• for the first time • when adding or reconnecting equipment • when changing setup

Advanced

53