Panasonic TH-L32D25M Setup, AV Colour, Auto / PAL / SECAM / M.NTSC / NTSC, Matrix, Motion, Film

Menu		Item	Adjustments / Configurations (alternatives)
		AV Colour	Selects optimum colour system based on video signals in AV mode
		System	(Auto / PAL / SECAM / M.NTSC / NTSC)
			Available only with 480p or 576p input on video signals in a natural colour from
		Colour	digital equipment connected to AV1 component or HDMI1 / HDMI2 / HDMI3
			terminals. Select SD or HD to adjust suitable colour parameters for SD (standard
		Matrix	definition) or HD (high definition)
			● SD: Input signal is a normal TV system
			● HD: Input signal is a high definition system
			Automatically compensates the picture frame rate and removes juddering
		Motion	movements to make the images smooth and clear (Off / Mid / Max)
			● This function is not available for selection (default to “Off”) when “Viewing
		Picture Pro
			Mode” is set to “Game” or in the mode of PC input, photo or Network
			service operations.
			Automatically compensates the picture frame rate to make the 24p source
			movie images smooth (Off / Mid / Max)
		24p Smooth	● This is available only for 24p signal input and displayed instead of
		Film	“Motion Picture Pro”.
			● This function is not available for selection (default to “Off”) when “Viewing
Setup	SettingsOther		Mode” is set to “Game” or in the mode of PC input, photo or Network
			Sets the time the TV automatically goes to Standby mode when no operation
			service operations.
		Resolution	Enhances the picture resolution to make the image sharper (Off / Mid / Max)
			● Not valid on PC, VIERA CAST and Media Player
		Enhancer	● You can set this function for each input.
			is performed for the selected times (Off / 2 hours / 4 hours)
		Auto	● Automatic input switching with the connected equipment affects this
		Standby	function and time-count will be reset.
			● The notification message will appear 3 minutes before going to Standby
			mode.
		Power Save	Reduces brightness of picture to economise on power consumption
			(Off / On)
			Selects the screen area for displaying the image (Off / On)
			On: Enlarges the image to hide the edge of the image
		16:9	Off: Displays the image in the original size
			● Set to “On” if noise is generated on the edges of the screen.
		Overscan	● This function is available when aspect is set to “16:9”.
			● This function can be memorized separately for SD (Standard Definition)
			and HD (High Definition) signals.
			Changes the black level in the image for HDMI input mode with DVI input
			signal manually (Normal / Full)
		DVI Input	● When the DVI input signal from the external equipment, especially from
		Setting	PC, is displayed, the black level may not be suitable. In this case, select

“Full”.

●The black level for HDMI input signal will be adjusted automatically.

●A different menu will be displayed when “Advance(isfccc)” in the Setup Menu is set to “On” or in the mode of Media Player or Network service operations. (p. 27 and p. 36 - 51)

●Only available items can be selected.

28