SOUND Adjustment
1
Press to display the SOUND menu.
2Select to adjust each item.
Press to select the menu to adjust. 
Select the desired level by listening to the sound.
3
Press to exit from adjust mode.
| SOUND | 1/2 | |
|
| NORMAL |
|
| NORMALIZE | STANDARD | |
| AUDIO MENU | ||
| BASS | 0 | |
| TREBLE | 0 | |
| BALANCE | 0 | |
SURROUNDOFF
Item |
| Details |
| STANDARD: Emits the original sound. | |
AUDIO MENU | DYNAMIC: | Accentuates sharp sound. |
| CLEAR: | Attenuates human voice. |
BASS | Adjusts low pitch sounds. | |
TREBLE | Adjusts high pitch sound. | |
BALANCE | Adjusts left and right volumes. | |
SURROUND | Select ON or OFF. | |
Note: BASS, TREBLE and SURROUND settings are memorized separately for each AUDIO MENU.
Helpful Hint ( 
/ NORMALIZE Normalization)
While the “SOUND” menu is displayed, if either the N button on the remote control is pressed at any time or the ACTION (
) button is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings.
SDI SOUND OUTPUT
This menu is available only when selecting a slot that the following terminal board is installed:
| SDI SOUND OUTPUT | 2/2 |
|
| LEFT CHANNEL | CHANNEL 1 | |
| RIGHT CHANNEL | CHANNEL 1 | |
| SOUND OUT | OFF |
|
| LEVEL METER | OFF | |
|
|
|
|
Item |
|
|
|
|
|
| Details |
LEFT CHANNEL | CHANNEL 1 to CHANNEL 16 | ||||||
Selects left audio channel. | |||||||
RIGHT CHANNEL | CHANNEL 1 to CHANNEL 16 | ||||||
Selects right audio channel. | |||||||
SOUND OUT | ON |
|
| OFF |
|
| |
|
|
|
| ||||
ON: | Enables audio output. | ||||||
| OFF: | Disables audio output. | |||||
| OFF |
|
|
| |||
|
|
|
| ||||
| Sets audio channels to show in the audio level meter. | ||||||
| 8 channels are displayed in the audio level meter; 4 channels | ||||||
LEVEL METER | each on both right and left sides of the display. | ||||||
| OFF: Hides the audio level meter. | ||||||
| |||||||
| |||||||
29