Network Setup
Make the various settings to use the network function.
SET UP | 2/2 |
MULTI DISPLAY SETUP
SET UP TIMER
PRESENT TIME SETUP
NETWORK SETUP
MENU DISPLAY DURATION |
| 15 S | ||
|
|
|
|
|
MENU TRANSPARENCY | 20 |
| ||
|
|
|
|
|
|
|
|
|
|
NETWORK SETUP
SAVE
DHCP | OFF |
|
|
IP ADDRESS | 192.168. 0. | 8 |
|
|
|
|
|
|
|
|
|
SUBNET MASK | 255.255.255. | 0 |
|
|
|
|
|
GATEWAY | 192.168. 0. | 1 |
|
| |||
|
|
|
|
PORT | 1024 |
|
|
|
|
|
|
LAN SPEED | AUTO |
|
|
|
|
|
|
NETWORK ID | 0 |
|
|
|
|
|
|
CONTROL I/F SELECT |
|
|
|
|
|
| |
MAC ADDRESS |
|
1 Set DHCP.
When “OFF” is selected, IP ADDRESS and other settings can be set manually.
2 Select the item and press .
3 Enter an address.
IP ADDRESS | 1 | Use |
| to select a digit. |
I192.168. 0. 8 |
| |||
| 2 | Use |
| to change a number. |
| ||||
| 3 | Press |
| . |
|
|
Pressing will cancel the address change. 4 Select “SAVE” and press .
PORT setting1 Select “PORT” and press. 2 Enter a port number.
PORT
I01024 | 1 | Use |
| to select a digit. |
| 2 | Use |
| to change a number. |
| 3 | Press |
| . |
|
| |||
| Pressing |
| will cancel the port number change. |
Save the current network Setup. Each value set for DHCP, IP address, Subnet mask, and Gateway will be saved. If “NG” is displayed, check the same IP address is not used within the same network.
DHCP (DHCP client function)To obtain an IP address automatically using a DHCP server, set this to “ON”. If DHCP server is not used, set this to “OFF”.
IP ADDRESS (IP address display and setting)Enter an IP address if DHCP server is not used.
SUBNET MASK (Subnet mask display and setting)Enter a subnet mask if DHCP server is not used.
GATEWAY (Gateway address display and setting) Enter a gateway address if DHCP server is not used.
Set the port number used for command control. The available setting range is 1024 – 65535.
When the PJLink™ protocol is used, the port setting is not necessary.
LAN SPEEDSet the connection speed of the LAN environment. Select the value from AUTO, 10 HALF, 10 FULL, 100 HALF or 100 FULL.
NETWORK IDSet the ID to identify this unit.
The available setting range is 0 – 99.
CONTROL I/F SELECTSet whether to control with
Display the MAC address of this unit. However, the MAC address is not displayed when the “CONTROL I/F SELECT” is set to
Notes:
•To use a DHCP server, make sure the DHCP server is started.
•Contact your network administrator for details on settings.
45