Item | Off | On |
| MENU&ENTER | Adjustments |
|
| |
|
|
|
|
| ||||
| Off: All the buttons on main unit can be used. |
|
| |||||
| MENU&ENTER: Locks | MENU and | buttons on main unit. |
|
| |||
| Button lock | On: Locks all the button on main unit except the Power switch. |
|
| |||||
Sets Button lock with the unit buttons in the following procedure. |
| four timesPress | ||||||
| Off: Press | + / | four timesPress | INPUT four timesPress | ||||
| MENU&ENTER: Press | four timesPress + / four timesPress | INPUT four timesPress | |||||
| On: Press | four timesPress | four timesPress | + / | four timesPress | |||
Off | User1 | User2 | User3 |
|
Off: | You can use all of the buttons on the remote control. | |||
Remocon User level User1:You can only use , , | , , | buttons on the remote control. | ||
User2:You can only use 
button on the remote control.
User3:Locks all the buttons on remote control.
Enable: Enables the
Note: When “Disable” is set, the
| Normal |
|
| On |
|
| Standby | ||||
|
|
|
|
| |||||||
| Sets the power mode of the unit for when the power recovers from failure or after plugging off and in again. | ||||||||||
Initial Power Mode | Normal: Power returns in as the same state as before the power interruption. | ||||||||||
Standby: Power returns in standby mode. (Power Indicator : red/orange) | |||||||||||
| |||||||||||
| On: |
|
| Power returns in power On. (Power Indicator : green) | |||||||
| Note: When using multiple displays, “Standby” is preferred to be set in order to reduce a power load. | ||||||||||
ID select | Sets panel ID number when panel is used in “Remote ID” or “Serial ID”. | ||||||||||
Set value range: 0 - 100 | |||||||||||
| (Standard value: 0) |
|
| ||||||||
| The setting of this menu is valid only when using ID remote control. | ||||||||||
| Off: | Disables ID remote control functions. You can use normal remote control operations. | |||||||||
Remote ID | On: | Enable ID remote control functions. | |||||||||
Note: To use the ID remote control function, it is necessary to set each ID number of remote control and | |||||||||||
| |||||||||||
|
|
| display unit. About the setting method, please refer to “ID Remote Control Function” (see page 39) | ||||||||
|
|
| and “ID select” | ||||||||
| Serial ID | Sets the panel ID Control. | ||||||||||
Off: | Disables external control by the ID. | ||||||||||
| On: | Enables the external control by the ID. | |||||||||
| Sets the top and end of a daisy chain when the SERIAL terminal of Display is daisy chained. | ||||||||||
Serial Daisy Chain |
| When the Display is under SERIAL control on a standalone basis, or if not at the top or end of daisy | |||||||||
| Top: | chain. |
|
| ||||||||
| To connect to the top of daisy chain. | ||||||||||
| End: | To connect to the end of daisy chain. | |||||||||
| Studio W/B | Off: | Nullify all the settings adjusted. | |||||||||
On: | Sets the color temperature for TV studio. | ||||||||||
| Note: Valid only when the “WARM” is set as “COLOR TEMP” in PICTURE menu. | ||||||||||
| Off |
|
|
| Auto |
| On | ||||
|
|
|
|
| |||||||
| Off: | Power is not transmitted to the slot power. | |||||||||
Slot power | Auto: Power is transmitted to the slot power only when main power is on. | ||||||||||
On: | Power is transmitted to the slot power when main power is on or in the standby state. | ||||||||||
| |||||||||||
| Note: In some cases, power is transmitted to the slot power when main power is on or in the standby state | ||||||||||
|
|
| regardless of the slot power setting. | ||||||||
| Off |
|
| 1 |
| 2 |
| 3.... |
|
| 30 |
|
|
|
|
|
| to turn | |
|
|
|
|
|
|
|
| ||||||||||||
| You can set the |
|
| ||||||||||||||||
|
| ||||||||||||||||||
| on the multiple displays that are set together, for example, on MULTI DISPLAY system. |
| |||||||||||||||||
Power ON Screen | Set each display’s setting individually. | is pressed. |
| ||||||||||||||||
Off: |
|
| The display will be turned on at the same time as |
|
|
| |||||||||||||
|
|
|
| ||||||||||||||||
| Delay | 1 to 30 (sec.): Set the |
|
|
|
| ||||||||||||||
| Notes: |
|
| After pressing |
|
| , the display will be powered on with time delay depending on this setting. | ||||||||||||
|
|
|
|
| |||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
•During this function is working, the power indicator is blinking green.
•This function also works when the power recovers from failure or after plugging off and in again the power cord.
Off: | Not display the clock. | |||
On: | Display the clock. | |||
The clock is displayed at the lower left of the screen when button is pressed. | ||||
| Clock Display |
|
|
| Note: When “PRESENT TIME SETUP” is not set, the clock is not displayed even |
|
|
| ||
|
|
|
| if “Clock Display” is “On” (see page 30) |
|
|
|
|
|
| 10:00 |
|
| |
|
|
|
|
|
47