Setup of SCREENSAVER Time
After selecting TIME OF DAY, INTERVAL or STANDBYAFTER SCR SAVER, the relevant Time Setup will become available for selection and the Operating Time may be set. (Time cannot be set when “MODE” is “ON” or “OFF”.)
Press to select START TIME / FINISH TIME (When TIME OF DAY is selected).
Press to select SHOW DURATION / SAVER DURATION (When INTERVAL is selected).
Press to select SCREENSAVER DURATION (When STANDBY AFTER SCR SAVER is selected).
Press to setup. button: Forward button: Back
Notes:
•Pressing “” or “” button once changes the Time 1 minute.
[However, switching occurs every 15 minutes when Periodic Time is selected.]
•Pressing “” or “” button continuously changes the Time by 15 minutes.
•“SCREENSAVER DURATION” of the “STANDBY AFTER SCR SAVER” can be set from 0:00 to 23:59. When this is set to “0:00”, “STANDBY AFTER SCR SAVER” will not be activated.
Note: Timer function will not work unless “PRESENT TIME OF DAY” is set.
SCREENSAVER
PRESENT TIME OF DAY MON 15 : 00
START
MODE | TIME OF DAY | |
START TIME | 6 : 15 | |
FINISH TIME | 12 : 30 | |
|
|
|
SCREENSAVER
PRESENT TIME OF DAY MON 15 : 00
START
MODE |
| INTERVAL | |
SHOW DURATION | 12 : 00 | ||
SAVER DURATION | 3 : 00 | ||
|
|
|
|
SCREENSAVER
| PRESENT TIME OF DAY | MON 15 : 00 | ||
| START |
|
|
|
| MODE |
| STANDBYAFTER SCR SAVER | |
| SCREENSAVER DURATION | 6 : 15 |
WOBBLING
Automatically shifts the display image (therefore unnoticeable to the eye) to prevent image retention of sharper contour of image.
1 | Press to display the SET UP menu. | |
2 | Press to select “WOBBLING”. | |
Press to select “ON” or “OFF”. | ||
| ||
| ON: Shifts the position of the display image on a xed time | |
| interval. | |
3 | Press to exit from adjust mode. | |
Notes: |
|
•If “MULTI DISPLAY SETUP” is set to “ON”, this function does not operate.
•When this function is operating, part of the screen may appear to be missing.
SET UP | 1/2 |
SIGNAL
SCREENSAVER
INPUT LABEL
ECO MODE SETTINGS
WOBBLING | OFF |
|
|
| RGB |
|
|
NO ACTIVITY POWER OFF | |
| DISABLE |
|
|
OSD LANGUAGE | ENGLISH (US) |
33