SET UP for Input Signals

NOISE REDUCTION

Press to select “NOISE REDUCTION”.

Press to select “OFF”, “AUTO”, “MIN”, “MID”, “MAX”. AUTO: NOISE REDUCTION will be automatically

selected from “MIN”, “MID” or “MAX”.

NOISE REDUCTION

OFF

Note:

NOISE REDUCTION can be adjusted while a Video or Component signal is being applied.

SYNC

This function operates only during input from PC IN terminal.

SIGNAL

[ RGB ]

Press to select the “SYNC”.

SYNC

AUTO

 

Press to adjust.

3 : 2 PULLDOWN

OFF

 

XGA MODE

1024×768

Con rm that the input is set to RGB input (this setting is valid only for RGB input signal).

AUTO:The H and V sync or synchronized signal is automatically selected. If both input, it is selected the H and V sync. However, the synchronized signal that is input  rst is selected.

ON G: Uses a synchronized signal on the Video G signal, which is input from the G connector.

Note:

Accepts only RGB signals from COMPONENT/RGB IN terminal with “SYNC ON G”.

HDMI RANGE

Switches the dynamic range according to the input signal from HDMI terminal.

Press to select “HDMI RANGE”.

SIGNAL

[ Digital ]

Press to select “VIDEO(16-235)”, “FULL(0-255)”, “AUTO”.

3 : 2 PULLDOWN

OFF

 

NOISE REDUCTION

OFF

 

HDMI RANGE

AUTO

VIDEO(16-235):If the input signal is the video range, Example: HDMI terminal output for DVD player

FULL(0-255):If the input signal is full range, Example: HDMI terminal output for personal computer

AUTO: Switches the dynamic range automatically between “VIDEO(16-235)” and “FULL(0-255)” according to the input signal.

Note:

This function can be set only for HDMI signal input.

43