Using Web Browser Control
NETWORK SETTING (Network Setup Screen)
Click NETWORK SETTING from the menu. Various settings of a network can be set. For the details of the setting items, please check NETWORK SETUP under the SET UP of the unit. (see page 45)
Notes:
•To use a DHCP server, make sure the DHCP server is started.
•During a DHCP server is used, IP ADDRESS, SUBNET MASK, and GATEWAY values cannot be entered.
•When the set values are changed properly, “NETWORK SETTING CHANGED.” message and the changed set items are displayed.
Item | Details | |
DHCP | Set to ON when a DHCP server is | |
used, or OFF when it is not used. | ||
| ||
IP ADDRESS | Enter an IP address. | |
SUBNET MASK | Enter a subnet mask. | |
GATEWAY | Enter a gateway address. | |
| Enter the port number used for | |
PORT | command control. The available | |
| setting range is 1024 - 65535. | |
LAN SPEED | Set the connection speed of the LAN | |
environment. | ||
| ||
NETWORK ID | Set the ID to identify this unit. The | |
available setting range is 0 - 99. | ||
| ||
SAVE | Save the each set value. |
Password Setting (Password Setup Screen)
Click CHANGE PASSWORD from the menu. Password to access the Web browser control can be set. When the password is changed in this screen, the password used for command control and the PJLink™ security authentication is also changed.
Notes:
•The default password is “Panasonic”.
•Up to 32 alphanumeric characters can be used for a password.
•When the password is changed properly, “Password has changed.” message is displayed.
Item | Details | |
OLD | Enter the old password. | |
PASSWORD | ||
| ||
NEW | Enter the new password. | |
PASSWORD | ||
| ||
NEW | Enter the password entered in “NEW | |
PASSWORD | ||
PASSWORD” for con rmation. | ||
(RETYPE) | ||
| ||
| Save the new password. The | |
SAVE | con rmation screen is displayed. | |
| Click OK to change the password. |
53