Panasonic TH 37PWD4 operating instructions Colour system / Panasonic Auto, Setup for Input Signals

Setup for Input Signals

Colour system / Panasonic Auto

Select Signal from the “Setup” menu during AV (S Video) input signal mode.(“Signal [AV]” menu is displayed.)

Press to select the “Colour System” or “Panasonic Auto”.

Press to select each functions.

Setup
Component/RGB-in select	RGB
Signal
Screensaver	English (UK)
OSD Language
MULTI DISPLAY Setup
Set up TIMER

If the picture image becomes unstable:

With the system set on Auto, under conditions of low level or noisy input signals the image may in rare cases become unstable. Should this occur, set the system to match the format of the input signal.

Press (Action) button

Signal		[ AV	]
3D Y/C Filter (NTSC)		On
Colour system	(4:3)	Auto
Panasonic Auto		4 : 3

Mode			Function
Colour system	Set the colour system to match the input signal. If set to “Auto”, the colour system
	is determined automatically.
	Auto	PAL	SECAM	M.NTSC	NTSC
Pansonic Auto	Set to “4 : 3” to view 4:3 images in an unchanged format when Panasonic
(4:3)	Auto is selected. If you would like to view 4:3 images in “Just” format, set
	to “Just”.

35