Stereo / Bilingual Sound Selection (Analogue TV mode)

When you receive the stereo / bilingual sound system, sound output modes can be selected by pressing the Sound Selection button.

Audio Signal

STEREO

 

 

MAIN I

 

SUB II

 

 

 

MONO

Mode Indicator

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NICAM .......Used in New Zealand, Singapore, Hong Kong etc.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Type of

Regular broadcast

Regular + NICAM MONO I

 

NICAM

NICAM DUAL MONO

broadcast

(Standard Audio)

(MAIN I )

STEREO

(MAIN I / SUB II )

Mode Indicator

No Indicator

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

I

 

 

 

 

II

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

A2 (German) .......Used in Australia, Malaysia etc.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Type of

Regular broadcast

BILINGUAL or DUAL MONO:

 

STEREO

 

 

 

 

 

 

 

 

 

 

 

broadcast

(Standard Audio)

MAIN I / SUB II

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Mode Indicator

No Indicator

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

If the stereo signal is poor or the receiving conditions are not optimum or if STEREO:MONO automatic switching occurs, it is recommended you switch from STEREO to MONO.

Even when the contents of the receiving signal undergo changes, selection mode is kept intact.

When the receiving conditions deteriorate, listening will be easier if the mode is set to the MONO position, using the Sound Selection button.

DUAL, also known as DUAL MONO or as BILINGUAL is not currently transmitted in some countries.

Media Player

SD Card

Card format : SDXC Card - exFAT

SDHC Card / SD Card - FAT16 or FAT32

Compliant card type (maximum capacity) : SDXC Card (64 GB), SDHC Card (32 GB), SD Card (2 GB), miniSD Card (2 GB) (requiring miniSD adaptor)

Technical Information

If miniSD Card is used, insert / remove it together with the adaptor.

Check the latest information on the card type at the following website. (English only)

http://panasonic.jp/support/global/cs/tv/

Use an SD Card which meets SD standards. If not, it may cause the TV to malfunction.

Do not remove the card while the TV is accessing data (this can damage 32 mm the card or TV).

Do not touch the pins on the back of the card.

Do not subject the card to high pressure or impact.

Insert the card in the correct direction (otherwise, card may be damaged).

Electrical interference, static electricity, or erroneous operation may damage the data or card.

Back up the recorded data at regular intervals in case of deteriorated or damaged data or erratic operation of the TV. (Panasonic is not liable for

any deterioration or damage of recorded data.)

USB Flash Memory

Format : FAT16, FAT32 or exFAT

On screen messages

2.1 mm

24 mm

Message

Meaning / Action

Cannot read file

The file is broken or unreadable.

 

The TV does not support the format.

No Device Inserted

Confirm SD Card or USB device is inserted correctly.

No valid file to play

The card has no data.

This operation is not possible

Your operation is not available.

72

Page 72
Image 72
Panasonic TQB4GC0625 manual Stereo / Bilingual Sound Selection Analogue TV mode, Media Player, Message Meaning / Action