Authentication Setting

The system administrator can enable/disable the user authentication for each function (copying, faxing, scanning, and printing).

Press FUNCTION

SET .

Enter the access code (4-digit) set for the machine, and press SET .

Press

, and then press SET .

Select the function where authentication is required.

SET : Selects the copy function.

SET : Selects the fax function.

SET : Selects the printer function.

SET : Selects the scanner function.

Note:

The Sender Selection feature is not enabled if the fax function is set to require the authentication.

For details, refer to the Operating Instructions for Internet Fax/Email and Network Scanner Functions.

Select "VALID" to use authentication or "INVALID" to disable authentication. SET : Disable authentication.

SET : Enable authentication.

ENTER ACCESS CODE

ENTER ACCESS CODE

****

FAX PARAMETER(1-182)

NO.=

126 USER AUTH 1:COPY

126 USER AUTH 2:VALID

Machine

When user authentication is enabled for the first time, you also need to specify the TIME ZONE, system administrator's name, and password.

Continued on the next page...

Setting

13