Authentication Method Setting

This specifies which authentication method is to be used by the User Authentication function.

Note:

When the User Authentication function is enabled, you must login to the machine before you can change settings. See the following sections for details about how to login.

See "Administrator Login" on page 24 for Logging in as the system administrator. See "Login Procedure" on page 8 for Logging in as a user.

Login to the machine, and press

 

 

 

 

.

 

 

ENTER ACCESS CODE

 

FUNCTION

 

SET

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Enter the access code (4-digit) set for the machine, and press

 

.

ENTER ACCESS CODE

SET

****

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

, and then press

 

 

.

 

 

 

 

 

FAX PARAMETER(1-182)

SET

 

 

 

 

 

 

 

 

 

 

NO.=

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

130 AUTH METHOD

Select the authentication method.2:NTLM

SET : Selects CLEAR TEXT.

SET : Selects NTLM.

Press STOP to return to standby.

Machine Setting

20