This completes authentication.
After completing authentication, you can use the selected functions (copying, faxing, scanning, or printing).
Note:
One of the following messages appears if authentication fails.
00%
Message | Explanation |
LOGIN FAILED | The login failed. |
| Check your user name and password. |
| Check whether the Date and Time is set properly. |
|
|
LOGON ATTEMPTS EXCEEDED | The system has been locked because the permitted number of login |
| attempts has been exceeded. Please contact the system administrator. |
|
|
CONNECTION FAILED | Unable to connect to the authentication server. Please contact the system |
| administrator. |
|
|
PROTOCOL ERROR | Unable to connect to the authentication server. Please contact the system |
| administrator. |
|
|
SERVER NOT FOUND | Unable to find the authentication server. |
| Check whether the DNS Domain Name is set properly (see page 16). |
| Check whether the Internet Parameters are set properly. |
| IP Address |
| Subnet Mask |
| Default Gateway IP Address |
| DNS Server Addresses |
Authentication is cancelled if no operation is performed on the machine within a certain time after authentication completes. In this case, you need to perform user authentication again before you can use the machine. The
system administrator can specify the ID Timeout Period. See "ID Timeout Setting" on page 17 for details.
The system administrator can specify whether authentication is required independently for each machine function (copying, faxing, scanning, and printing).
See "Authentication Setting" on page 13 for details.
Using Machine (for User)
9