ID Timeout Setting

If the ID Timeout Setting is set to "AUTO RESET TIME", authentication is cancelled if no operation is performed on the machine for a specified time period after performing authentication. The ID timeout period is set by the "AUTO RESET TIME Setting" on page 18.

Note:

When the User Authentication function is enabled, you must login to the machine to change settings. See the following sections for details about how to login.

See "Administrator Login" on page 24 for Logging in as the system administrator. See "Login Procedure" on page 8 for Logging in as a user.

Login to the machine, and press FUNCTION

SET .

Enter the access code (4-digit) set for the machine, and press SET .

Press

, and then press SET .

Select the ID Timeout setting.

SET : (AUTO RESET TIME) An authenticated user will be logged out if no operation is performed on the machine for a specified time after performing authentication.

SET : (AFTER EVERY JOB) An authenticated user will be logged out when the operation performed after authentication is completed.

Press STOP to return to standby.

ENTER ACCESS CODE

ENTER ACCESS CODE

****

FAX PARAMETER(1-182)

NO.=

127 ID TIMEOUT 1:AUTO RESET TIME

Setting Machine

17