Introduction and Installation
2 Attach the mounting bracket to the wall using the wood screws (3.8 mm x 20 mm). LBefore drilling, see page 13 for installation location.
Mounting bracket
83.5 mm
Wood screws
Wall
Wire (Not included)
3 Connect the wires that connect to the monitor station to the terminal connector by unscrewing the screws, pushing in the wires, then tightly fastening the screws.
LSee page 15 for the wire type and distance.
LYou can change the camera angle using the camera angle control lever. See page 13 for details.
Terminal connector | Camera angle control lever |
(Non polar) |
|
Screw |
|
Wire (Not included)
17
