Introduction and Installation
To attach the power cable
Monitor station | DC terminal |
Button
Button 
Terminal
Terminal connector connector
LWhile pressing on the button with a pointed object such as a screwdriver, insert the power cable into the terminal.
LTo disconnect the power cable, press on the button while pulling out.
LTo attach an optional power cable, cut off about 12 mm of the cable cover (1), then push in firmly until the end of the cable is securely inserted into the power connection terminal (2).
12 Power cable cross section
Correct Incorrect
12 mm
To attach the wires
Button | Terminal connector |
LStrip off of the wire cover so that about 9 mm of the wire is exposed.
LWhile pressing on the button with a pointed object such as a screwdriver, insert the wire into the terminal connector.
LTo disconnect a wire, press on the button while pulling out.
26
