12
■ On the Monitor 2 (To display liveor recorded image)
Notes:
•Same images displayed on monitor 2 will be displayed
on the VGA monitor.
•The camera title will be displayed with 16 characters (2
lines: 8 characters per line).
Important:
•Since the VGA output from this unit is the same as for
televisions (720 H x 480 V pixels/vertical frequency of
59.94 Hz), it may be possible that both the left and right
edges can not be fit onto the screen depending on the
VGA monitor.
•It is impossible to use the MONITOR (VGA) connector
when connecting the unit in the cascade connection.
•It may take time to display live image on the VGA moni-
tor if the VGA monitor is turned on/off during the unit is
running.
1. Camera Title
Displays the edited camera title.
A position to display a camera title can be selected
from the following.
Upper left, upper right, lower left, lower right, center
The default camera title position is lower right (R-
LOWER).
2. Task Bar
Displays the current status.
The task bar consists of the main bar (w- A), the left
bar (w- B), and the right bar (w- C).
There are 3 different ways to display the task bar as fol-
lows.
Mode 1
Displays only the main bar and the status is displayed
on it.
Mode 2
Displays the status on the main bar, the left bar and the
right bar.
Mode 3
Displays the status only on the main bar, and does not
display information on the left bar and the right bar.
Note: Mode 2 and Mode 3 are graphic images. They
may not be as clear as Mode 1.
q
qq
q
q
w – A
w
–
B
w
–
C