Panasonic WJ-HD309 w

111

w[Monitor 2] Switcher function of monitor 2

Perform the settings for the switcher function of monitor

2.

●Live Sequence

The settings for "Live Sequence" are the same as for

"Monitor1". Refer to page 109 for further information.

●Sequence Timing

The settings for "Sequence Timing" are the same as for

"Monitor1". Refer to page 110 for further information.

Notes:

•"EXT" is selectable only when an external device that

can transmit a sequence signal is connected.

•The sequence changeover I/O (pin no.21) of the

ALARM/CONTROL connector on the rear panel will

supply signals when "INT" is selected and will receive

signals when "EXT" is selected.

●Auto Skip

The settings for "Auto Skip" are the same as for "Monitor1".

Refer to page 110 for further information.

●Login Screen

The settings for "Login Screen" are the same as for

"Monitor1". Refer to page 110 for further information.

Event Schedule

System

Display

Comm

Switcher

SETUP MENU

LIVE

Maintenance Recording

Monitor 1

Monitor 2

■ Live Sequence

■ Sequence Timing

■ Auto Skip

■ Login Screen

SETUP

INT

OFF

CAM1

Contents

Main WJ-HD309 5 10/0 Model Nos. WJ-HD316 Digital Disk Recorders ENGLISH VERSION CAUTION IMPORTANT SAFETY INSTRUCTIONS CONTENTS PREFACE FEATURES Various Recording Functions Frame Switcher Function Remote Operation via Network PRECAUTIONS TRADEMARKS AND REGISTERED TRADEMARKS LIMITATION OF LIABILITY MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS Front View !5 !6 !7 @6 @7 @8 @9 qw e r !5 !6 !7 @6 @7 @8 @9 Page Rear View w t y ui o !0 !1 !3 !5 !8 !2 !4 !6 !7e r !9 o !0 !1 !3 !5 !8 !2 !4 !6 !7q e On the Monitor 1 (To display only live image) qq wewe wewe On the Monitor 2 (To display live or recorded image) Status on the Task Bar On the Main Bar Page On the Right Bar On the Left Bar STARTUP z 60 Hz) x c CLOCK ADJUSTMENT JAN .01 .03 12 00 00 ON JAN . 01 .03 12 00 00 JAN . 01 .03 12 00 00 SHUTDOWN x z RECORDING (Manual Recording) Recording Mode and Priority Recording Time Recording with audio Recording without audio z x RECORDING (Emergency Recording) z images to be played. (Go to step 2 if not neces- sary) x x PLAYBACK [WJ-HD316] c z Available functions during playback + Page z Copy area x WJ-HD309) (DISK SELECT). PLAYBACK IMAGE ON A DESIGNATED DISK Built-in hard disk Normal recording area Event recording area zx DISK SELECT c v image to be played, and press the SET button to determine the selection. b selected recorded image. PLAYBACK FROM A DESIGNATED TIME AND DATE Searching For a Recording Event and Playback (Recording Event Search) Recording Event List Window SEARCH AND PLAY Recording Event Thumbnail Window zz recording event list window is displayed. <Thumbnail window> x searching filter (TIME & DATE, CAMERA, EVENT, TEXT), and press the SET button. <List window> c v to be played. b <Thumbnail window> Searching for a motion detected time and date from recorded images and play it (VMD search) VMD search list is displayed. <List window> n x JAN 1 03 12 00 12 00 JAN START 0 (DC) from the following. DURATION 20s 20s VECTOR 3 4 3 34 35 ton to start searching and display the results of the VMD search. 5 To delete the motion detection area zx x z on the status bar. x Searching for a marked point and play from that point (Marking search) xz marking list window is displayed. x time. MONITOR LIVE IMAGES Displaying Live Images on a Single Screen x (1 - 16 for the WJ-HD316, 1 - 9 for the WJ- HD309) to select a camera. Electronic Zoom Displaying on a Multi-screen c the WJ-HD309) to select a desired multi- screen. z c zc Sequential Display c z c zc CONTROL CAMERAS Panning/Tilting Moves a camera horizontally/vertically. z The PAN/TILT indicator will light. Iris Adjusts the iris of the lens. z x x PRESET POSITION window will be displayed. To reset the set iris, press the SET button. Move a camera to the preset position z PRESET NUMBER The PRESET/AUTO indicator will light and the PRESET/ AUTO PAN window will be displayed. x Auto Function (Auto Pan, etc) z x arrows button and check the radio button next to "AUTO PAN" using the jog dial. c ABOUT THE EVENT FUNCTION About the Motion Detection Function (VMD) Action at an event occurrence About the event action mode Alarm Mode (ALARM) Alarm Function Cancel the Alarm Action HDD 1 HDD 2 RESET D COPYING (Duplicate) z x c c z x cc v and press the SET button. v v Deletion of recorded images saved on the hard disk manually The cursor will be displayed on the "Data Delete" menu. DELETE DATA ON THE DISK xc b To not delete, select "CANCEL". The images recorded the day before the set time and date will be subject to be deleted. n button and press the SET button. FORMAT (INITIALIZE) A DVD-RAM DISK and press the SET button. z x c n , m ton and press the SET button to start format- ting. , DISPLAY/EDIT TEXT INFORMATION z c INFORMATION window. v b and the jog dial. Digital Disc Recorder WJ-HD316 n acters. ERROR/WARNINGS Page OPERATION USING A SYSTEM CONTROLLER Available only during recording Reverse play at 2x Reverse play at 5x Reverse play at 10x Reverse play at 20x Page 4 3 5 11 10/0 OPERATION USING A PC Features Downloading/transmitting images Event notification function Host authentication INSTALLATION IN THE RACK MANAGEMENT OF USERS/HOSTS When the unit is operated directly When the unit is operated using a PC via a network OPERATING THE UNIT FOR THE FIRST TIME LOST Information of recording areas : [SETUP/ESC] OK : [SET] RESTART EXIT REMOVE Preparation for maintenance (HDD replacement, installation, etc.) This can be set on the "Disk Info" menu of "Maintenance". Refer to page 93 for further information. The SETUP MENU will be displayed on the monitor 2 and the VGA monitor. x c CONNECTIONS System cameras (VIDEO IN 9 - 16) Combination cameras (VIDEO IN 1 - 8) Monitor 1 Monitor 2 120 V AC 60 Hz Mode switch setting (Factory default) Connections with an extension unit IN OUT 12 Extension unit (WJ-HDE300) This unit Cable (attached to the extension unit) Connections with DVD-RAM, CD-R, and DVD-R drives Designated DVD-RAM drive, etc. RESET + HDD 1 Connections with the VCR RESET + 1413 HDD 1 Connections with PSData systems RS485 cable (provided with the controller) (No. 8: ON) Unit Address (System) : 1 Unit Address (Controller) : 2 When this unit is connected with the system device (when this unit is used as a controller) Unit Address : 2 (No.8 : OFF) Mode switch Unit Address (System) : 1 Unit Address (Controller) : 2 Cascade connection of multiple units When no PSData compatible device is connected to the system Controller : 1 Third unit (No. 8: ON) Controller : 4 (No. 8: ON) Unit Address settings of "PSData Setup" of "Comm" on the (Locally procured) BNC Cable (provided with the controller) Controller : 1 PS Unit Address settings of "PSData Setup" of "Comm" on the Controller : 4 PS Unit Address: 1 PS Unit Address settings of "PSData Setup" of "Comm" on the Connection with the RS485 camera 1:1 connection Daisy connection No.2 No.3 No.5 No.6 Mode Switch ON 67812345 RS485 Port DATA G N D How to Use the Terminals of the ALARM/CONTROL Connector Pin array q!3 @5 !4 Connection for emergency recording Connection for external recording changeover ALARM/CONTOROL ALARM/CONTOROL Connection to synchronize the sequential display changeover (when multiple units are used) Connection for the Auto Adjust Time function When "Auto Adjust Time" of "System" on the SETUP MENU is set to "MASTER" (Time adjust output) !3 @0 "Time Adjust Output" becomes available and the clock of this unit can be applied to other units. Connection with the Uninterruptible Power System (UPS) Connection of the control output How to Use the Terminals of the ALARM Connector Pin Configuration Alarm connection How to Use the SERIAL Connector Connection example of cross cable Personal compute Pin Configuration Connection example SETUP Item list of the SETUP MENU Page About the SETUP MENU Live image Main area LIVE SET UP MENU Basic Operation with the SETUP MENU zPress the SETUP/ESC button for 2 seconds or more when displaying live images. The top page of the SETUP MENU will be displayed. Manual REC xSelect a main menu using the arrows button and press [Maintenance] Functions for Maintaining Event REC Area Copy Area COPY 1 (Rear) COPY 2 (Front) e Version information of the software and the hardware, and the MAC address will be displayed. Software Hardware(M) r the available hard disk space has run out t the available disk space is running out y u i o q recording. [Recording] w emergency recording q O K CANCEL duration and the buzzer duration [Event] Function for Events ON Delete the motion detection area Set the sensitivity Set the detection mode About the Detection mode e alarm auto reset and alarm disarm r alarm terminal polarity. Flowchart how to create a schedule q [Resolution] [Schedule] Settings for the recording/event action schedule Recording Rate and Image Quality for Each Camera Channel w event occurrence O K CANCEL Do the following to create timetables. VMD Start operation after displaying the timetable window. zPress the SET button. O K xSelect a day of the week using the arrows button (CD) The pop-up settings menu of the timetable for the selected day of the week will be displayed. r ing programs for special days q Perform the settings for the switcher function of monitor 1. Live Sequence [Switcher] Settings for the switcher function The "Live Sequence" pop-up menu will be displayed. xMove the cursor to "CAM" of "STEP 1" using the arrows button. The cursor moves to "CAM". Auto Skip Login Screen Secret View Sequence Timing w Live Sequence Sequence Timing Auto Skip Login Screen [Display] Time & Date Display Position Camera Title Display Position Line Color on the Multi Screen w Time & Date Display Camera Title Display Alarm Display e Display Mode T & D and Status Display Position Camera Title Display q [Comm] Settings for communication with other devices 2 400/4 800/9 600/19 200/38 400 bps 8 bit Perform the following settings for RS485. Select a stop bit from the following. 1 bit/2 bit e 4 800/9 600/19 200 bps Control Camera CH 9 600/19 200/38 400 bps r Perform the following settings for RS232C. Unit Address(System) Retry Timing t HTTP Port Number User Authentication Host Authentication Line Speed u Time Adjustment Time Zone NTP Server Address Refresh Interval [System] Settings on System Auto Copy w Date Format Time Format Time Setup Auto Adjust Time e operates this unit User Name Password Level y accessible to this unit Host IP Address Level Default Screen u mation i o !0 the SETUP MENU Functions that can be enabled/disabled DISPLAY SETUP MENU OF CAMERA DISK MANAGEMENT Notes on hard disk How to replace the built-in hard disk When replacing the hard disk drive after turn- ing off the power of the unit. Page When replacing the hard disk drive without turning off the power of the unit. When replacing the built-in hard disk of the extension unit Display of the HDD DISK MENU About the HDD DISK MENU RAID 5 Function of the Extension Unit Setup/cancel the RAID 5 function Formatting (Initialization) the Hard Disk WJ-HD300 When the hard disk is formatted (initialized), all of the recorded images will be deleted. Formatting (initialization) all hard disks (unit) "TOP MENU" of the "HDD DISK MENU" will be auto- matically displayed. Formatting (initialization) the selected hard disk (unit) "TOP MENU" of the "HDD DISK MENU" will be dis- played automatically. cMove the cursor to "FORMAT" using the arrows button vRotate the jog dial to enter the password for an admin- istrator. Refer to page 54. bMove the cursor to "OK" using the arrows button (CD) [Screenshot 6] The confirmation menu of the set recording area will be dis- <Screen displayed when selecting "AUTO SETUP"> The confirmation dialog window will be displayed. (step 13) [Screenshot 7] [Screenshot 8] [Screenshot 9] Start mirroring Setting for Mirroring Cancel mirroring (MIRROR OFF) Hard disk recovery (MIRROR ON) cEnter the password for an administrator by rotating the jog dial. bMove the cursor to "OK" using the arrows button (AB) Remove the Hard Disk Logically and Reconfigure it (REMOVE) "TOP MENU" of the "HDD DISK MENU" will be auto- matically displayed. xMove the cursor to "REMOVE" using the arrows button Page SERIAL (RS232C) Communication Protocol Command Format 1. The following details how to write the commands 2. Response Command (from the Unit to the PC) SERIAL (RS232C) CONNECTOR COMMAND REFERENCE [STX] [ETX]QOP [STX] [ETX]QRV:1.01:1.01:1.00:1.10 [STX] [ETX]QRV ERN[ETX] =Error 3. Reception Error N [NCK] = Reception failed (ASCII code: 15H) 4. PC Connection Example Command Table Page Page Page Page Page FLOWCHART OF THE SETUP MENU PARAMETERS AND THE DEFAULT SETTINGS OF THE SETUP MENU Page Page Page Page Page TROUBLESHOOTING Page Page Page SPECIFICATION STANDARD ACCESSORIES