Panasonic WJ-HD309 manual 116

●Baud Rate

Select the communication speed for data transmission with a connected device from the following.

2 400/4 800/9 600/19 200/38 400 bps

●Data Bit

It is impossible to change the value for this setting. 8 bit

●Parity

Select a method to check a transmission error at communi- cation from the following.

NONE: No parity check

EVEN: Even parity

ODD: Odd parity

●Stop Bit

Select a stop bit from the following. 1 bit/2 bit

●Retry Timing

Select a retransmission interval for when data reception is not confirmed from the following.

OFF/100 ms/200 ms/400 ms/1 000 ms

●Alarm Data

Select a method to inform the connected controller of an event occurrence from the following.

OFF: Does not function.

0 s: Informs the controller every time an event is detected.

1 s/5 s: Informs the controller when a specified time has passed after detecting an event.

●Camera Number Setup

It is possible to assign a number to each camera channel to operate cameras using the controller compatible with PS·Data.

Do the following to assign numbers to the camera chan- nels.

[Screenshot 1]

Start operation from the "PS·Data Setup" menu.

SETUP MENU
	Maintenance	Recording	Event	Schedule		LIVE
	Switcher	Display	Comm		System
	■ Unit Address(System)
Camera Control					001
	■ Unit Address(Controller)				001
PS.DATA Setup
	■ Cascade				OFF
RS485 Setup
	■ Baud Rate				9600
RS232C Setup	■ Data Bit			8
NW Setup 1	■ Parity				NONE
	■ Stop Bit				1
NW Setup 2
	■ Retry Timing				OFF
NTP Setup
	■ Alarm Data				1s
	■ Camera Number Setup				SETUP

z Move the cursor to "Camera Number Setup" using the arrows button (C D) and press the SET button.

[Screenshot 2]

The "Camera Number Setup" pop-up window will be dis- played.

SETUP MENU
		Maintenance	Recording	Event	Schedule	LIVE
		Switcher	Display	Comm	System
	Control■ Camera■ UnitNumberAdress(System)Setup				001
Camera
	SetupCAM PORT		CAM NO.	CAM PORT	CAM NO.
PS.DATA
		Cascade
RS485 Setup		1	001	9	009
RS232C	Setup	2	002	10	010
		3	003	11	011
NW Setup	1
NW Setup	2	4	004	12	012
NTP Setup		5	005	13	013
		6	006	14	014
		Camera		Setup	015
		7	007	15
		8	008	16	016
				O K	CANCEL

xMove the cursor to a desired "CAM No." of "CAM PORT" using the arrows button.

[Screenshot 3]

The cursor will move to the selected "CAM No." of "CAM PORT".

SETUP MENU			Maintenance	Recording	Event	Schedule	LIVE
			Switcher	Display	Comm	System
		Control■ Camera■ UnitNumberAdress(System)Setup				001
Camera
		SetupCAM PORT		CAM NO.	CAM PORT	CAM NO.
PS.DATA
			Cascade
RS485 Setup			1	001	9	009
RS232C	Setup		2	002	10	010
NW Setup		1	3	003	11	011
NW Setup		2	4	004	12	012
NTP Setup			5	005	13	013
			6	006	14	014
			Camera		Setup	015
			7	007	15
			8	008	16	016
					O K	CANCEL

cSelect a camera number by rotating the jog dial. Repeat steps 2 and 3 to assign camera numbers to the other CAM PORT.

v Move the cursor to "OK" using the arrows button and press the SET button.

→Camera numbers will be assigned and the "Camera Number Setup" menu will be closed.

Notes:

•When you move the cursor to "CANCEL" in step 4 and press the SET button, the settings will be can- celed and the "Camera Number Setup" menu will be closed.

•The assignment of camera numbers will not be applied until the SET button is pressed after moving the cursor to "OK" in step 4.

e[RS485 Setup] Settings for RS485

Perform the following settings for RS485.

SETUP MENU	Maintenance	Recording	Event	Schedule	LIVE
	Switcher	Display	Comm	System
	■ Baud Rate
Camera Control				19200
PS.DATA Setup	■ Control Camera CH			SETUP
	■ Data Bit			8
RS485 Setup	■ Parity			NONE
RS232C Setup	■ Stop Bit			1

NW Setup 1

NW Setup 2

NTP Setup

116