Panasonic WV-BP334, WV-BP332 manual Focus Or Flange-Back Adjustment

FOCUS OR FLANGE-BACK ADJUSTMENT

The following adjustment should be made by qualified service personnel or system installers.

1.Loosen the screws on the flange-back adjusting ring.

Focus adjustment for

CS-mount lens Focus adjustment for

C-mount lens

Flange-back

Adjusting Ring

Screws

3.Tighten the screws on the flange-back adjusting ring.

Note: If the camera is connected to the Quad System, glare may appear at the edge of the camera picture on the monitor.

If this bothers you, adjust the lens focus to reduce the glare.

2.Turn the flange-back adjusting ring to the desired position.

Caution: When the C-mount lens is mounted, do not rotate the ring counterclockwise by force after it stops. If the ring is rotated by force, the inner lens or CCD image sensor may be dam- aged.

-13-