FOCUS OR FLANGE-BACK ADJUSTMENT
The following adjustment should be made by qualified | 3. Tighten the screws on the flange-back adjusting |
service personnel or system installers. | ring. |
1. Loosen the screws on the flange-back adjusting | |
ring. | |
Focus adjust for | |
CS-mount lens | |
Focus adjust for | |
C-mount lens | |
Flange-back | |
Adjusting Ring | |
Screws
2.Turn the flange-back adjusting ring to the desired position.
Caution: When the C-mount lens is mounted, do not rotate the ring counterclockwise by force after it stops. If the ring is rotated by force, the inner lens or CCD image sensor may be dam- aged.
-12-
