45
Configure the settings relating to the preset positions ("Preset No." setup menu)Click the [SETUP>>] button of "Preset Position" on the [Image/Position] tab of the "Camera setup" page.
(☞page 40)
It is possible to register, edit and delete the preset positions on this page.
When the focus, brightness, zoom factor are adjusted, the adjustment will be applied immediately to the currently
displayed image on the [Image/Position] tab.
Important:
When the zoom factor is 22x or more, the setting of the preset positions will become unavailable.
Depending on the environment (such as when the temperature is below 5°C (41 °F), for example), the moving speed
of the camera to the preset position may become slower.
Register the preset positionStep 1
Move the camera to the position to be registered as a
preset position, and then select the desired preset posi-
tion number.
Step 2
Click the [SET] button.
→The selected preset position number will be dis-
played next to "Position No.".
Step 3
To display the preset ID on the "Live" page, select "ON"
for "Preset ID" and enter the desired preset ID to be dis-
played. Then, click the [SET] button to apply the set-
tings.
Step 4
The settings of "Auto focus", "Dwell time", "Super
Dynamic 3" and "Mask area" can be configured for each
position independently.
Edit the settings of the registered presetpositionStep 1
Select the preset position number whose settings are to
be edited.
Step 2
Click the [GO] button.
Step 3
When the camera reached the preset position, do steps
3-4 of "Register the preset position".