Panasonic WV-NS202A Configure the settings relating to images and audio [Camera setup]

Configure the settings relating to images and audio [Camerasetup]

The settings relating to JPEG/MPEG-4 images and camera operations such as the settings of image quality, preset

positions, audio, etc. can be configured on this page.

The "Camera setup" page has 4 tabs; the [JPEG/MPEG-4] tab, the [Cam Function] tab, the [Image/Position] tab and

the [Audio] tab.

Click the [JPEG/MPEG-4] tab on the "Camera setup" page. (☞pages 20 and 21: How to display/operate the setup

menu)

Configure the settings such as "Refresh interval (JPEG)*", "Image capture size" and "Image quality" on this section.

Refer to page 36 for further information about the settings relating to MPEG-4 images.

[Refresh interval (JPEG)*]

Select an interval to refresh the displayed JPEG image

from the following.

0.1 fps/0.2 fps/0.33 fps/0.5 fps/1 fps/2 fps/3 fps/5 fps/

6 fps */10 fps */15 fps */30 fps *

Default: 5 fps

Note:

When "ON" is selected for "MPEG-4 transmission",

the refresh interval may be longer than the set value

when any value with an asterisk (*) on the right is

selected.

[Image capture size]

Select "QVGA" or "VGA" for the image capture size of

JPEG images.

Default: VGA

[Image quality]

Select image quality of JPEG images from the following.

0 Super fine/1 Fine/2/3/4/5 Normal/6/7/8/9 Low

Default: 5 Normal