60
Step 5
Select the detection sensitivity from the following. The
selected detection sensitivity will be applied to all the
VMD areas.
1 (Super high)/2/3/4 (High)/5 (Middle)/6 (Low)
Default: Middle
Step 6
Click the [SET] button after completing the settings.
Important:
The setting will not be applied unless the [SET] but-
ton is clicked.
Delete the VMD area set for the designated preset position
Step 1
Display the VMD area setup window of the preset posi-
tion number whose VMD area is to be deleted.
(☞page 59)
Step 2
Click the [Delete] button respective to the area to be
deleted.
→The outline of the area will disappear.
Step 3
Click the [SET] button.
→The deletion will be completed.
Important:
The deletion will not be completed unless the [SET]
button is clicked.