Panasonic XX-XXXX USB (Universal Serial Bus) Interface

Maintenance and Specifications

Settings and Printing

Maintenance and Specifications

Speciﬁcations

Cable: use a shielded cable 5 m (16.4 feet) or less in length.

Pin conﬁguration

USB Interface connector (printer side)

NOTE

•Be sure to use a full-speed shielded cable which the Data + and Data – cables are the

twisted pair.

•When using KX-P7100 printer and other USB devices simultaneously, we cannot guarantee

normal printing.

USB (Universal Serial Bus) Interface

Signal pin Signal

BUS

2 -Data

3 + Data

4 Ground

Contents

Main Page Supplies Replaceable Components Page Page Page Page Turn the sponge up and carefully wipe the laser unit cover glass with a dry lint-free cloth. Page Clearing a Jam Page Page Page Page Page Page Page Page Page Jam at D Page Page Troubleshooting Page Page Page Page A If you cant make a print Page Cleaning the Photosensitive Drum Page Side pin Page Error Indication *1The indication varies depending on the printer status. Error Indication * Turn off the printer; remove the power cord and all interface cables. Open the front cover. Repacking Instructions Repacking Lift the drum unit up ( # ) and slide it out of the printer ( $ ). Page Page Wipe off any loose toner in and around the printer. Repack the printer. Specications Printer Page Media Paper Specications Paper and Envelope Sizes Types of Paper to Avoid Transparencies and Labels Envelope Specications Page Page Bi-directional Parallel Interface Pin Signal Page USB (Universal Serial Bus) Interface