1 |
33 1/2 X 8” |
37 |
48 |
SECURELY |
TIGHTEN |
DO NOT 35 |
TIGHTEN |
9 |
FIGURE 9 |
STEP 9
•SECURELY TIGHTEN ALL FRAME CONNECTION BEFORE PROCEEDING TO NEXT STEP
•SECURELY TIGHTEN top of both SHAFT COLLARS (48) flush to bottom of both BOOM PLATES (4),(5)
•Assemble the PRIMARY PIVOT (9) of the PRESS ARM ASSEMBLY to the top of the FRAME (1) using 1/2 X 8” BOLT (33), two 1/2” FLAT WASHERS (37) and 1/2” LOW HT LOCK NUT (35). IMPORTANT! DO NOT TIGHTEN YET
| 1/2 |
| 1/2 |
| 1/2 |
| 1/2 |
| 1/2 |
|
| 1/2 |
0 | 1 | 2 | 3 | 4 | 5 | 6 | ||||||
11
