ParaBody 220 manual 3/8 x 3”, Step

	11
3/8 x 3” 29
		1
		34
3/8 x 3-3/4” 30
		42
24
FIGURE 16	21	34
		36

STEP 16:

•Refer to cable ILLUSTRATION “A” on page 11 for cable routing while installing pulleys.

•[CABLE MUST BE POSITIONED BETWEEN PULLEY AND LOWER BOLT ASSEMBLY ON LEG PEDESTAL (11) AND FRAME (1)]

•Securely assemble the ball end of the LOW CABLE (21) and one 3-1/2” PULLEY (24) to the LEG PEDESTAL (11) using two 3/8 X 3-3/4” BOLTS (30), two 3/8” X 1-1/16” FLANGE SPACERS (42), two 3/8” WASHERS (36), and two 3/8” LOCKNUTS (34).

(NOTE: The LEG CABLE (21) should be routed over the retaining bolt as shown in FIGURE 16.)

•Securely assemble one 3-1/2” PULLEY (24) to the FRAME (1) using one 3/8 X 3” BOLTS (29), and one 3/8” LOCKNUT (34).

(NOTE: The LEG CABLE (21) should be routed over the retaining bolt as shown in FIGURE 16.)

18