ParaBody 220 manual 28 3/8 X 2-3/4”, Step

13
		19
10
	36
	28 3/8 X 2-3/4”	22
58		61
	52
		1
	50
FIGURE 10

STEP 10:

•Apply WEIGHT STACK LABELS (61) to WEIGHTS (22) and HEAD PLATE (19) as shown in FIGURE 10.

Begin with number one at the HEAD PLATE (19) with larger numbers in consecutive order towards bottom of weight stack.

•Apply four PARAGLIDES (58) to the INSIDE of the tube of FRAME (1) as shown. Apply the remaining four PARAGLIDES (58) to the OUTSIDE and FLUSH TO BOTTOM of tube located on SEAT ADJUSTMENT (10)

•Securely assemble one SEAT PAD (13) to the SEAT ADJUSTMENT (10) using two 3/8 X 2-3/4” BOLTS (28) and two 3/8” WASHERS (36) as shown.

•Securely assemble one SEAT PAD (13) to the FRAME (1) using two 3/8 X 2-3/4” BOLTS (28) and two 3/8” WASHERS (36) as shown.

•Gently insert SEAT ADJUSTMENT (10) into tube located on FRAME (1)

DO NOT FORCE THE SEAT ADJUSTMENT IN. THIS MAY CAUSE THE PARAGLIDES TO TEAR.

•Securely tighten the SPRING PIN (50) to the FRAME (1) and hand tighten the THREE PRONG KNOB (52)

12