ParaBody 220 manual X 3-3/4 31 3/8 X

3/8 X 3-3/4” 30	24
	1
	43
	42
	34
31 3/8 X 8”
36
44
	9
	27
FIGURE 14	12

STEP 14:

•Refer to cable ILLUSTRATION “A” on page 11 for cable routing while installing pulleys.

•Assemble one 3-1/2” PULLEY (24) into the PRIMARY PIVOT (9) lower hole using one 3/8 X 8” BOLT (31),

two 3/8” FLAT WASHERS (36), two 3/8 X 1-3/16” SPACERS (44) and one 3/8” LOCK NUT (34) and tighten securely.

•Assemble one 3-1/2” PULLEY (24) to the FRAME (1) using one 3/8 X 3-3/4” BOLT (30), two 3/8 X 1-1/16” FLANGE SPACERS (42), one 3/8” LOCK NUT (34) and tighten securely

•Loosely assemble one 3-1/2” PULLEY (24) between PULLEY PLATES (12) using one 3/8 X 1-3/4” BOLT (27) and one 3/8” LOCK NUT (34).

•Assemble two 3-1/2” PULLEYS (24) between the left and right BOOM PLATES (4) and (5) using two 3/8 X 3-3/4” BOLTS (30), four 3/8 X 1” SPACERS (43) and two 3/8” LOCK NUTS (34)

	1/2		1/2		1/2		1/2		1/2		1/2
0		1		2		3		4		5		6

16