ParaBody 400101 manual See Detail

FIGURE 36	48	11
			91
	79		51
		66
SEE DETAIL 36		3/8 X 2-3/4”	38
			DETAIL 36

STEP 36

•Securely assemble the ball end of the AB CABLE (91) and one 3-1/2” PULLEY (79) to the FRONT UPRIGHT (11) using two 3/8 X 2-3/4” BOLTS (38), two 3/8” FLANGE SPACERS (66), two 3/8” WASHERS (51), and two 3/8” LOCKNUTS (48). (NOTE:

The AB CABLE (91) should be routed underneath the retaing bolt as shown in DETAIL 36.)

FIGURE 37

91

79

22

STEP 37

•Route threaded end of AB CABLE (91) around 3-1/2” PULLEY (79) while assembling one 3-1/2” PUL- LEY (79) to the lower FLOATING PULLEY BRACKET (22) using one 3/8 X 1-3/4” BOLT (36) and one 3/8” LOCKNUT (48) as shown in FIGURE 37.

48

3/8 X 1-3/4” 36

	1/2		1/2		1/2		1/2		1/2		1/2
0		1		2		3		4		5	6

25