STEP 11 |
|
|
|
|
• Securely assemble the PEC SEAT PAD (27) to the FRONT UPRIGHT |
|
|
|
|
(11) as shown, using two 3/8 X 4” BOLTS (41), and two 3/8” WASH- |
| 11 |
|
|
ERS (51) as shown in FIGURE 11. |
| 27 |
| |
|
|
|
| |
• Assemble two ROLLER PADS (31) to the FRONT UPRIGHT (11) |
|
|
|
|
using one 16” TUBE (34), and two STARLOCK COLLARS (75) as | 3/8 X 4” 41 | 51 |
|
|
shown in FIGURE 11. |
|
| ||
|
|
|
| 75 |
|
|
|
| 31 |
|
| 34 |
|
|
| FIGURE 11 |
|
| |
|
| • All WASHERS & LOCKNUTS | ||
|
| are 3/8” WASHERS (51) & 3/8” | ||
|
| LOCKNUTS (48). |
| |
11 |
|
| 41 | 3/8 X 4” |
|
|
| ||
1
10
FIGURE 12 | 3/8 X 3” 39 |
STEP 12
•Loosely attach FRONT UPRIGHT (11) to the BASE (10) using two 3/8 X 3” BOLTS (39), four 3/8” WASHERS (51), and two 3/8” LOCKNUTS (48) as shown in FIGURE 12. (NOTE: Make sure cable is routed under the bolts.)
•Loosely attach FRAME SUPPORT (1) to the BASE (10) using one 3/8 X 3” BOLT (39), two 3/8” WASHERS (51), and one 3/8” LOCKNUT (48) as shown in FIGURE 12. (NOTE: Make sure cable is routed under the bolts.)
•Loosely attach FRAME SUPPORT (1) to the FRONT UPRIGHT (11) using two 3/8 X 4” BOLTS (41), four 3/8” WASHERS (51), and two 3/8” LOCKNUTS (48) as shown in FIGURE 12.
10
