ParaBody 400101 manual Step

16
69
49
52	79
	48
	66
1/2 X 3” 42	10
	66
3/8 X 2-3/4”	38
	90
FIGURE 1

STEP 1

•Securely assemble REAR UPRIGHT (16 ) to BASE (10) using two 1/2 X 3" BOLTS (42), two 1/2" WASHERS (52), and two 1/2" LOCKNUTS (49).

•Slide 227" CABLE ASSEMBLY (90) through openings in BASE (10) as shown in FIGURE 1.

•Securely assembe three 3-1/2" PULLEYS (79) into BASE (10) using three 3/8 X 2-3/4" BOLTS (38), six 3/8" FLANGE SPACERS (66), and three 3/8" LOCKNUTS (48). (NOTE: Make sure 227" CABLE ASSEMBLY (90) is routed under

PULLEYS and BOLTS.)

•Insert four 3/4" FLANGE BEARINGS (69) into tubes on REAR UPRIGHT (16) as shown in FIGURE 1

4