ParaBody Hip Sled System manual Do not Securely Tighten

*	DO NOT SECURELY TIGHTEN
	AT THIS TIME
6
28
33
32
41 1/2 X 3-1/4”
	1	*3/8 X 3” 37
	23
		29
		4
26
29	31
* 3/8 X 3” 37	5
FIGURE 1

STEP 1:

•SECURELY assemble the REAR UPRIGHT (6) to the BASE (1) as shown in FIGURE 1 using two 1/2 X 3-1/4” BOLTS (41), four 1/2” WASHERS (32), and two 1/2” LOCK NUTS (33).

•LOOSELY assemble the RIGHT (4) and LEFT HANDLES (5) to the BASE (1) on their respective sides using four 3/8 X 3” BOLTS (37), eight 3/8” WASHERS (29), and four 3/8” LOCK NUTS (31) (DO NOT SECURELY TIGHTENATTHIS TIME)

	1/2		1/2		1/2		1/2		1/2		1/2
0		1		2		3		4		5	6

6