Front Panel Emulation
G-4 3166-A2-GB20-10November 1998
6. If you chose a Local destination, click on the Execute button. If you chose a
Remote destination, enter the telephone number of the far-end DSU/CSU in
the Phone Number field, then click on the Dial button.
7. The front panel of the selected DSU/CSU appears on the PC.
NOTE:
When using Front Panel Emulation, no LEDs are shown on the PC’s
screen; you must use the Stat command procedure to get LED
information (see

Displaying LED Conditions

in Chapter 3,
Operation
).