Paradyne 3166 CSU, 3166 DSU Initiating an ATI Session, Ending an ATI Session

Asynchronous Terminal Interface Operation
H-2 3166-A2-GB20-10November 1998
Initiating an ATI Session
Once the appropriate configuration option changes have been made and access
is established, the Main Menu screen appears (unless a password is required).
Figure H-1 shows the Main Menu screen.
The DSU/CSU shows the 3000 Series carrier slot number under the
Customer ID. The slot number field (e.g., Slot: 1) is changed to access specific
DSU/CSUs in the carrier. For Telnet or SNMP access to the carrier, specify the IP
address of the applicable communication port (see Appendix F,
IP Network
Addressing Scenarios
).
If a password is required, the Login screen displays the prompt for password
input. (Refer to
Entering a Password to Gain Access on page H-13.)
To move between the Screen area and the Screen Function Keys area
(Figure H-1), press Ctrl-a (control key and a).
From the Screen area, you may select the Status, Test, Configuration, or
Control branches.
Ending an ATI Session
To end the ATI session from any screen, press Ctrl-a to move from the Screen
area to the Screen Function Keys area (Figure H-1), and then select Exit.
main
Customer ID: Node A Model: 3166
Slot: xx
MAIN MENU
Status
Test
Configuration
Control
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions Exit
Screen
Area
Screen
Function
Keys
Area
Figure H-1. Main Menu Screen