Monitoring and Testing
4-28 3166-A2-GB20-10
November 1998
3. From the Patterns screen, select Mon.
F1
Patterns:
Abort Send Mon
F2 F3
4. From the Patterns Mon screen, press F1 for QRSS or F2 for 511.
F1
Patterns: Mon
QRSS 511
F2 F3
5. From the Monitor screen, press the Function key that corresponds to the
interface for which you want to send a test pattern. (NET does not appear for
the 511 pattern.)
F1
Monitor:

Name

NET Prt1
F2 F3
The Monitor screen appears with the error count. If the maximum of 99999 is
exceeded, OvrFlw appears instead of the count. If the receiver loses
synchronization while the monitor is active, No Sync appears.
Aborting Test Patterns
Use the Abort command to stop all test patterns or any selected test pattern
active on the DSU/CSU.
Procedure
To abort test patterns:
1. From the top-level menu screen, select Test.
2. From the Test screen, select Ptrns.
F1
Test:
Rlpbk Lpbk Ptrns
F2 F3