Custom Network Interface Settings
5-6 Issue 1 September 1994
Setting the Number of SubnetMask Bits
Use Subnet Mask... to specify the number of subnet mask bits.
These bits are used to partition IP addresses into a network and
host portion, if needed.
Procedure
1. Choose Settings... from the Network menu. The
Custom window appears, as shown in Figure 5-1.
2. Choose Setup from the Custom window menu bar.
3. Choose Subnet Mask... from the Setup menu. The
Subnet Mask dialog box appears, as shown in
Figure 5-4.
Figure 5-4. Subnet Mask Dialog Box
4. Click and drag the Subnet Mask slide bar to the correct
location, or type the number of subnet mask bits.
5. Choose OK.