Custom Network Interface Settings
5-8 Issue 1 September 1994
NOTE:
SLIP, CSLIP, and PPP are 8 bit protocols and must have
the following settings: 8 Data Bits, 1 Stop Bit, and None
Parity.
4. Change the port settings, as needed.
5. Choose OK.
Table 5-3. Port Settings Dialog Box Fields
Field Description
Baud Rate Transfer data rate.
Data Bits Number of data bits per byte.
Stop Bits Number of stop bits.
Parity Parity.
Flow Control Flow control for data transmission.
Connector Communications port to use.
Parity Check Enables indication of byte where parity error exists.
Carrier Detect Indicates modem signal should be used.