Custom Network Interface Settings

5-3

Issue 1 September 1994
Table 5-1. Custom Window Fields (2 of 2)
IP Internet Protocol address (home address) for the
workstation.
Domain Not required.
Configuring LAN HardwareParameters
Use Hardware... to select and configure the following
hardware-related parameters for Ethernet, Token Ring, or FDDI
networks:
Vendor
Board Type
Procedure
1. Choose Settings... from the Network menu. The
Custom window appears, as shown in Figure 5-1.
2. Choose Setup from the Custom window menu bar.
3. Choose Hardware... from the Setup menu. The
Hardware dialog box appears, as shown in Figure 5-2.