Choosing Port Settings | Paradyne 6700-A2-GB22-00 instruction

Custom Network Interface Settings

Choosing Port Settings

Use Port... to specify communications port settings for SLIP, CSLIP, or PPP interfaces.

!CAUTION:

Perform changes to port settings other than baud rate and connector settings with caution. Hardware flow control is the default setting due to binary communication requirements.

.Procedure

1.Choose Settings... from the Network menu. The Custom window appears, as shown in Figure 5-1.

2.Choose Setup from the Custom window menu bar.

3.Choose Port... from the Setup menu. The Port Settings dialog box appears, as shown in Figure 5-5.

Table 5-3 describes the fields on the Port Settings dialog box.

Figure 5-5. Port Settings Dialog Box

Issue 1 September 1994

5-7

Image 41

Paradyne 6700-A2-GB22-00 manual Choosing Port Settings, Port Settings Dialog Box

Contents

AT&T Paradyne is amended to read Paradyne Corporation Paradyne All Rights Reserved Series Network Management System Trademarks This page intentionally left blank Issue 1 September Contents Snmp Settings Configuration Files and Interfaces Workstation SettingsSnmp Settings Custom Network Interface Settings Tables Custom Nework Interface Settings Related Documents Preface Ordering Information Overview What is the Network Configuration Feature?Preparing for Network Configuration Optional Network Configuration Main Menu Accessing the Network Configuration Feature Main Menu Options Network Configuration Main Menu Options Workstation Settings Adding Names and IP Addresses ProcedureDesignating NMS Server Names IP Addresses Modifying or Deleting Names and IP Addresses Active Server Dialog Box Choosing the Active Server Station Administration Dialog Box Entering Administrative Data Configuration Files and Interfaces Exiting a Configuration File Configuration FilesSaving a Configuration File Adding an Interface Interfaces Interface Name Dialog Box Duplicating an Interface Delete Interface Dialog Box Deleting an Interface Auto Connect Interfaces Dialog Box Automatically Connecting InterfacesPage Snmp Settings Uses Configuring Snmp Community Names Community Names Dialog Box Choose OK. The Main Menu appears 4Issue 1 September Adding Authorized Manager Information Procedure Configuring Authorized Snmp ManagersPage Snmp Settings Custom Network Interface Settings Custom Window Fields 1 Viewing Network Settings Custom Window Fields 2 Configuring LAN Hardware Parameters Hardware Dialog Box Fields Description Hardware Dialog Box Internet Address Dialog Box Selecting the IP Address of a Workstation Subnet Mask Dialog Box Setting the Number of Subnet Mask Bits Port Settings Dialog Box Choosing Port Settings Port Settings Dialog Box Fields Description Modem Settings Dialog Box Choosing Modem Settings Modem Settings Dialog Box Fields Description Dial Settings Dialog Box Specifying Dial Settings Dial Settings Dialog Box Fields Description Designating the Default Gateway Agent GlossaryAddress mask Baud BackupBuffer Client Dial-up DaemonDevice name Domain EIA DSU File server File accessGateway Group id Host table HostIcmp Internet LAN IP addressLog Log out MIB ManagerNdis Network address NFS NewtNIC Ping RFC RAM SMI SlipSnmp STD Tftp TCPTCP/IP User name Token ringUser id Index