Paradyne 8303, 8304, 8310, 8312, 8314, 8343, 8344, 8510, 8373, 8374 3-30

3. DSL Card Configuration

3-30 April 2001 8000-A2-GB26-50

Table 3-5. Service Node Options

SN Configuration A-F

Displays endpoint information for the service node (SN).

NOTE: Although the System Name, System Contact and System Location can be

entered on this screen, DSL Router SNs use and display the SNMP information set via

the System Group.

Interface Name – Enter the DSL interface. Valid choices for the DSL card are dsl1:1

through dsl4:1 = 4-port DSL card interface; dsl1:1 through dsl12:1 = 12-port DSL card

interface, dsl1:1 through dsl24:1 = 24-port DSL card interface (Default = dsl1:1).

SN Type – Model number of SN connected to the DSL port as entered on the DSL Ports

screen (A-B-B). (This field is read-only.)

System Name – 16 alphanumeric characters. Enter the name assi gned to the SN

(Default = nobody).

System Contact – 32 alphanumeric characters. Enter the name or number of the person

responsible for the SN (Default = noname).

System Location – 16 alphanumeric characters. Enter the location of the SN

(Default = nowhere).

System Circuit ID – 32 alphanumeric characters.

Model Num – Model number of card. (This field is read-only.)

Serial Num – Serial number of card. (This field is read-only.)

Firmware Rev – Version of firmware. For DSL Router SNs, data from both active and

alternative firmware banks is displayed. (This field is read-only.)

Hardware Rev – Version of hardware. (This field is read-only.)

DSP Rev – Version of GlobeSpan chipset. (This field is read-only.)

IUT Revision – Version of the ISDN U-Interface Transceiver (IUT) for Model 8303/8304

IDSL cards only. (This field is read-only.)

Switch SN Firmware & Reset? – Yes/No. For DSL Router SNs, enter yes to have the

DSL Router SN load firmware from the alternate bank after a firmware reset. This field

does not appear for MVL or ReachDSL/MVL cards.

Reset SN? – Yes/No. Enter yes to reset the SN and begin a self-test.

NOTE: Entering yes in the Reset SN field will temporarily disrupt the data path on the

specified DSL port while the SN resets.

SN Switch Result – The results of the program switch on the SN.

SN Selftest Result – Pass/Fail. This field displays the results of the SN self-test, when

completed.

Contents

Main Page Contents About This Guide 1 Hotwire DSL System Description 2 Hotwire Menus and Screens ii 3 DSL Card Configuration 4 Monitoring the Hotwire DSL System 5 Diagnostics and Troubleshooting A Download Code BTraps Page About This Guide Document Purpose and Intended Audience vi It is highly recommended that you read the Hotwire Management Communications Controller (MCC) Card, IP Conservative, Users Guide Document Summary Section Description Product-Related Documents Document Number Document Title viii Document Number Document Title Hotwire DSL System Description What is the Hotwire DSL System? 1-2 The following illustration shows a typical configuration for a Hotwire 8820 GranDSLAM chassis. The following illustration shows a typical Hotwire configuration using IDSL cards. Hotwire DSL System Components Hotwire Shelf Concentration Module (SCM) Card Users Guide DSL Cards 1. Hotwire DSL System Description 1-4 SCM Card RADSL DSL PORT ETHERNET 3 Hotwire 8800 Digital Subscriber Line Access Multiplexer (DSLAM) Installation Guide Hotwire 8810 DSLAM Installation Guide 1. Hotwire DSL System Description 1-6 Front View of a Hotwire 8820 GranDSLAM Chassis 00-16573-01 DSL PORT ATM BUS Hotwire DSL System Features 1-8 Configuring the DSL Cards DSL Card Configuration. Monitoring the DSL Cards Monitoring the Hotwire DSL System. Troubleshooting and Diagnostics Diagnostics and Troubleshooting. DSL Sourcebook. Page Hotwire Menus and Screens Menu and Screen Formats Components of a Hotwire Menu Commonly Used Navigation Keys 2-2 Components of a Hotwire Screen Card Status Card Info Troubleshooting Diagnostics and Troubleshooting. 2-4 Commonly Used Navigation Keys Levels of Access Hotwire Management Communications Controller (MCC) Card, IP Conservative, Users Guide. User Login Screen 2-6 Hotwire Menu Hierarchy Hotwire Chassis Main Menu Quick Card Select Screen Port Card Select Screen Hotwire Management Communications Controller (MCC) Card, IP Conservative, Users Guide Quick Card Select Screen Port Card Select Screen Chassis Information Screen Field Input Current Users Screen Characters Description Field Description Hotwire DSL Menu From this menu, you can configure, monitor, and troubleshoot a specific DSL card. DSL Card Configuration Menu 2-12 DSL Card Monitoring Menu Logging In to the System Hotwire Management Communications Controller (MCC) Card, IP Conservative, Users Guide. Accessing a Selection Screen Hotwire Management Communications Controller (MCC) Card, IP Conservative, Users Guide Hotwire DSL Routers Users Guide 2-14 The following is an example of the Quick Card Select screen. 2-16 Accessing the Hotwire DSL Menu Exiting from the System Manually Logging Out Automatically Logging Out DSL Card Configuration Overview Hotwire Management Communications Controller (MCC) Card, IP Conservative, Users Guide. Naming Conventions 3-2 Configuring Subnet Addressing Configuring Subnet Masks Domain Types Service Domain Management Domain Minimum Configuration Minimum Configuration When Using the 5620, 6310, or 6350 SN DSL Configuration Card Screens NOTES: hh:mm mm/dd/yy Page Table 3-1. Card Options (3 of 3) Download Code nnn.nnn.nnn.nnn Download Code 3-8 DSL Configuration Ports Screens Ports Table 3-2. Ports Options (2 of 9) 3-10 Table 3-2. Ports Options (3 of 9) Table 3-2. Ports Options (4 of 9) 3-12 Table 3-2. Ports Options (5 of 9) CO and SN On-hook Voltage Drop Threshold Settings Table 3-2. Ports Options (6 of 9) 3-14 Table 3-2. Ports Options (7 of 9) Hotwire Management Communications Controller (MCC) Card, IP Conservative, Users Guide Table 3-2. Ports Options (8 of 9) GranDSLAM Channel Bank Digital Carrier System LT NT Hotwire IDSL Router LT NT 3-16 Table 3-2. Ports Options (9 of 9) DSL Configuration Interfaces Screens Interfaces 3-18 Table 3-3. Interfaces Options DSL Configuration Users Screens DSL Configuration Bridge Screens 3-20 Configuring VNID(s) on a DSL Card : Card VNID Table Exception When Using a DSL Router Changing the Existing VNIDs or VNID Attributes Exception When Using a DSL Router 3-22 Configuring the Active VNID and the Next Hop Router on each DSL Port/Interface VNID Binding Table Configuring Static Users . Client VNID Table 3-24 Table 3-4. Bridge Options (1 of 5) Table 3-4. Bridge Options (2 of 5) 3-26 Table 3-4. Bridge Options (3 of 5) Table 3-4. Bridge Options (4 of 5) 3-28 Table 3-4. Bridge Options (5 of 5) xx-xx-xx-xx-xx-xx DSL Configuration Service Node Screens SN Configuration 3-30 Table 3-5. Service Node Options DSL Configuration Filters Screens Configuring IP Filter Rules Page 3-34 Configuring Ethernet Filters Table 3-6. Filters Options (1 of 3) General Interfaces Configuration 3-36 Table 3-6. Filters Options (2 of 3) Table 3-6. Filters Options (3 of 3) Configuration General Interfaces Page Monitoring the Hotwire DSL System Overview DSL Card Configuration. Diagnostics and Troubleshooting. 4-2 DSL Monitoring Card Screens Table 4-1. Card Options Hotwire Management Communications Controller (MCC) Card, IP Conservative, Users Guide Chapter5, Diagnostics and Troubleshooting, . 4-4 DSL Monitoring Physical Layer Screens Physical Layer Page 4-6 Table 4-2. Physical Layer Options (1 of 8) Table 4-2. Physical Layer Options (2 of 8) 4-8 Table 4-2. Physical Layer Options (3 of 8) Table 4-2. Physical Layer Options (4 of 8) 4-10 Table 4-2. Physical Layer Options (5 of 8) Table 4-2. Physical Layer Options (6 of 8) 4-12 Table 4-2. Physical Layer Options (7 of 8) Table 4-2. Physical Layer Options (8 of 8) 4-14 DSL Monitoring Interfaces Screens Interfaces Table 4-3. Monitor Interfaces Options 4-16 DSL Bridge Screens Table 4-4. Bridge Options (2 of 4) xx.xx.xx.xx.xx.xx 4-18 Table 4-4. Bridge Options (3 of 4) DSL Card Configuration. DSL SN Information Screen SN Information 4-20 Table 4-5. Service Node Options DSL Monitoring Filters Screens Filters 4-22 Table 4-6. Filters (2 of 2) DSL Card Configuration. Page 5-2 Diagnostics Table 5-1. Diagnostics Options (2 of 2) Page Troubleshooting Components of a Hotwire Screen Card Monitor Diagnostics 5-6 Table 5-2. Major Alarms (2 of 3) Diagnostics Selftest Table 5-2. Major Alarms (3 of 3) 5-8 Minor Alarms Diagnostics Selftest (D-A) Page 5-10 Network Problems 5-12 High-Level Troubleshooting Client Cannot Ping the Gateway Router 5-14 Client Cannot Reach Service Node Table 5-4. Client-to-Service Node Segment Page 5-16 Table 5-5. Service Node-to-DSL Card (Access Node) Segment (2 of 2) Client Cannot Reach IPC Client Cannot Reach Router 5-18 Table 5-6. AN-to-IPC Segment Client Cannot Reach Router Table 5-7. IPC-to-Router Segment 5-20 Cannot Upload Configurations to a UNIX Server Performance Issues Viewing Network Statistics Physical Layer Menu Options Hotwire Management Communications Controller (MCC) Card, IP Conservative, Users Guide Page A Download Code Download Code Menu Option A-2 Download Code Apply Download Page B Traps DSL Card Traps B-2 or n. Table B-1. DSL Card Traps (2 of 3) nn Table B-1. DSL Card Traps (3 of 3) Page Glossary GL-2 Page GL-4 Page Page Index A B C D E F G H I S T V