Paradyne Table 4-2. Physical Layer Options (8 of 8)

4. Monitoring the Hotwire DSL System
8000-A2-GB26-50 April 2001 4-13
DSL Xmit Status (DSL Transmit Stats) B-B-G
Displays the transmit and receive statistics for each of the DSL ports after selecting a
specific DSL port number. This screen is not supported for Model 8303/8304 IDSL cards.
Enter port name (for example, dsl1:1 through dsl12:1 for 12-port cards) to see the fields
for current 15-minute period (real-time count of events during the past 0–15 minutes),
previous 15-minute period (data updated every 15 minutes), previous 1-hour period (data
updated every hour), and current day, starting at 12:01 a.m. (data updated every hour).
The counters increment in real time and you may press Ctrl-r at any time to reset the
counters.
Port Name – Enter port name (for example, dsl1:1 throug h dsl12:1 for 12-port cards) you
wish to monitor.
dn xmit pwr – Measure of the power level of the downstream signal sent to the SN
(in db).
up xmit pwr – Measure of the power level of the upstream signal sent by the SN (in db).
dn rx gain – Measure of how much amplification was appli ed to t he sig nal rec eiv ed at the
SN.
up rx gain – Measure of how much amplification was appli ed to t he sig nal rec eiv ed at the
DSLAM port.
dn att est – Measure of the downstream transmission loss on the DSL line.
up att est – Measure of the upstream transmission loss on the DSL line.
Table 4-2. Physical Layer Options (8 of 8)