Paradyne Table 4-3. Monitor Interfaces Options

4. Monitoring the Hotwire DSL System
8000-A2-GB26-50 April 2001 4-15
Table 4-3. Monitor Interfaces Options
Active List (Active Interfaces List) B-C-A
Displays a list of the current status of all of the active interfaces in the card.
Num – Number of the interface.
Intf Name – Name of the interface (for example, eth1:1, sar1: 1, dsl1 :1 throug h dsl12: 1 f or
12-port cards, etc.).
Type – Interface type (static).
Link – Name of the protocol on the interface.
State – Current state of the interface.
ll-state – Not applicable.
Port Name – Port linked to this interface.
The only information that changes on this screen is the state (active or port-wait) column.
Status (Interface Status) B-C-B
Displays a list of additional information, after a specific interf ace (po rt) has been sel ected .
Interface Name – Name of the interface (for example, eth1:1, sar1:1, dsl1:1 through
dsl12:1 for 12-port cards, etc.).
protocol – Type of protocol for the entered interface name.
port – Port linked to this interface.
restarts – Number of times interface has been restarted.
user – None.
type – Static.
link-downs – Number of times the link has gone down.
state – Active or prtwait.
inactivity T/O – Number of times the interface has timed out.