4. Monitoring the Hotwire DSL System
8000-A2-GB26-50 April 2001 4-19
DSL SN Information Screen
Use the SN Information screen to display read-only Service Node inform ation.
Procedure
1. Follow this menu selection sequence:
Monitoring

SN Information

(B-F)
2. The SN menu appears. The information displayed on this screen is shown in
Table4-5, Service Node Options .
ARP Table B-D-F
Displays the current Address Resolution Protocol (ARP) cache.
Line Sequential number of line.
IP Address Internet Protocol Address.
MAC Address MAC address associated with the IP address. (An incomplete can be
shown in this column for some internal entries such as the backplane.)
Min Number of minutes since this entry was last used.
VNID VNID between 24000 for DSL cards with an Ethernet Network Interface, or
2255 for DSL cards with an ATM Network Interface (Default = none).
Flags Various flags associated with this entry.
PM = permanent
PB = publish this entry (respond for other hosts)
TR = trailers
PX = proxy ARP (card will proxy ARP for this IP address)
SB = subnet proxy ARP
Table 4-4. Bridge Options (4 of 4)