Hotwire 5446 RTU Next Hop Router Support | Paradyne manual

Hotwire 5446 RTU Next Hop Router Support

The Hotwire 5446 RTU now includes support for next hop routers and a default gateway.

The following illustration includes a router and a default gateway. The maximum of 32 end-user systems applies to end-user systems directly connected to the 5446 RTU (with or without a hub) and end-user systems connected to routers. Any connections to a default gateway are not included in the 32 systems.

5446 RTU

DSL/POTS

	Customer Premises (CP)
	End-user
	Systems
		End-user
		Systems
Hub	Router	Hub
	Default	Hub
	Gateway	Hub
	Gateway

98-16091

15

Image 15

Paradyne installation instructions Hotwire 5446 RTU Next Hop Router Support, Customer Premises CP

Contents

Wiring and Cables Needed Before You BeginDocument Number Document Title What Does the Hotwire 5446 RTU Do? Package ChecklistDSL Access with a Hotwire 5030 or 5038 Pots Splitter DSL Access with a Hotwire 5038 Distributed Pots Splitter Network Service ProviderCustomer Premises CP DSL Access without a Pots Splitter Installing the DSL Access Wiring ProcedurePunchdown Block DSL/POTS Telephone Network Interface Device NID RJ11 Wall Jack Installing the Hotwire 5446 RTU Hotwire RTUPots Splitter Ethernet Line Power-On Alarm redDigital Subscriber Line green Ethernet Link green Optional RTU Wall Placement RTU Hardware Template Condition Status Status LEDs LED Symptom Action Troubleshooting Hotwire 5446 RTU Next Hop Router Support Hotwire 5446 RTU IP Setup Network Service Provider ExampleExample using TCP/IP Network Settings with Windows Cables & Connectors Increasing the Number of End-User SystemsPin # Function Pin Straight-Through Connection Ethernet CablePin Ethernet Crossover Cable Function Pin # Pin # Function Specification Hotwire 5446 RTU Technical Specifications Important Safety Instructions Japan Declaration of Conformity Canada EMI Warnings CE Marking Warranty, Sales, Service, and Training Information Document FeedbackTrademarks